690255
41
Zoom out
Zoom in
Previous page
1/48
Next page
If a problem occurs ...
Set 880 | 41
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the
proposed solutions, visit the Set
880 product page at www.sennheiser.com for the most up-to-date
list of frequently asked questions.
You may also contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your
country, search at www.sennheiser.com.
Sound only on
one ear
The balance is misadjusted. Adjust the balance. 26
The audio cable is not properly con-
nected.
Check the audio plug connection. 11
The TV has only a mono headphone
socket.
Use an adapter (mono to stereo jack
socket) to connect the transmitter to
the TV.
Sound is less
spatial
Mono operation is activated. Activate stereo operation. 34
Sound is dis-
torted
The audio cable is defective. Replace the audio cable.
The signal of the audio source is
distorted.
Reduce the volume of the audio
source.
The volume on the stethoset
receiver is adjusted too high.
Reduce the volume on the stethoset
receiver.
25
You hear echoes
when using the
stethoset
receiver with a
TV
Some TVs can adjust a delay or
latency of the audio signal for the
digital audio output.
Check the audio output settings of
your TV and set the latency to “0”.
The battery
status display
goes off
The battery status display is set so
that it goes off after 30 seconds.
Set the battery status display so that
it is permanently displayed.
36
More than one stethoset receiver is
currently connected to the trans-
mitter.
This function is only possible when
only one stethoset receiver/receiver is
connected to the transmitter.
2 beeps during
operation
The rechargeable battery is almost
empty.
Recharge the rechargeable battery. 16
The operating
time decreases
The rechargeable battery is
exhausted.
Have the rechargeable battery
replaced by an authorized Sennheiser
service partner.
32
A hearing
profile, the
balance or
stereo/mono
operation
cannot be
activated or
changed
The settings protection function is
activated.
Deactivate the settings protection
function (for the hearing profile, the
balance and stereo/mono operation).
37
More than one stethoset receiver/
receiver is currently connected to
the transmitter.
This function is only possible when
only one stethoset receiver/receiver is
connected to the transmitter.
The stethoset
receiver does
not connect to
the transmitter
The stethoset receiver is not paired
with the transmitter.
Pair the stethoset receiver with the
transmitter.
33
The distance to the transmitter is
too large.
Reduce the distance between the
stethoset receiver and the
transmitter.
4 stethoset receivers are currently
connected to the transmitter.
Up to 4 stethoset receivers can be
simultaneously used with the
transmitter.
Problem Possible cause Possible solution Page
41


Need help? Post your question in this forum.

Forumrules
1

Forum

sennheiser-set-880

Reset search

  • How to replace the battery in a senheiser set880 stetherscope headphone Submitted on 9-8-2021 at 17:54

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser Set 880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser Set 880 in the language / languages: English as an attachment in your email.

The manual is 8,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sennheiser Set 880

Sennheiser Set 880 User Manual - German - 45 pages

Sennheiser Set 880 User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info