690333
53
Zoom out
Zoom in
Previous page
1/57
Next page
SDW 5000 series headset system
IF A PROBLEM OCCURS ...52
Problem Possible cause Solution Page
The talk time is reduced Worn-out rechargeable battery
Ask a technician to replace the
rechargeable battery.
50
Large distance between base
station and headset
Reduce the distance if possible. Larger
distances require a higher transmission
power and reduce the talk time.
Fast Link activated
Deactivate Fast Link to save battery
power.
27
Many DECT systems in the same
area
Switch off DECT systems that are
currently not required. Congestion
requires a higher transmission power
and reduces the talk time.
How many DECT systems can be used in
the same room? This depends on various
conditions:
Americas: up to 40 SDW systems
in narrowband mode or in high
density wideband mode (available in
HeadSetup™ Pro)
Rest of World: up to 80 SDW systems
in narrowband mode or in high
density wideband mode (available in
HeadSetup™ Pro)
Narrowband/wideband setting
Set the base station to narrowband
transmission as it requires less power
than wideband transmission.
28
Dropped calls due to
high density
High density: Too many DECT
systems in the same area
Reduce the radio range on all DECT
systems in the area.
27
Reduce audio quality to narrowband or
wideband.
28
Ensure “Fast Link” is not selected on
DIP switch 4.
27
Bad audio quality:
you sound too low/
distorted/ echoing to the
other party/ background
noise
Microphone sensitivity is not
correctly adjusted
Adjust the microphone sensitivity. 30
Microphone is too far away from
your mouth
Adjust the microphone position. 18
DIP switch settings do
not work
Base station settings were
updated and overwritten via
HeadSetup™ Pro
Reset the system 53
No system re-boot after DIP
switches were changed
Disconnect the base station shortly
from power.
26
Headset/ base station
does not react to any
button press
The operation of the headset or
base station is faulty
Reset the products to the factory
default settings.
53
Battery status LED’s
on the base station
are flashing and the
multi-function button is
lit up red
Firmware version of the headset is
older than the firmware version of
the base station
Update the firmware of the headset. 50
No Bluetooth connection
via dongle BTD 800 USB
Dongle not inserted correctly in
the base station
Plug in the dongle again. 14
Dongle and mobile device not
connected
Pair the dongle and your mobile device
(Pairing).
15
Activate Bluetooth on your mobile
device.
Dongle and Bluetooth headset not
connected
Pair the dongle and your headset
(Pairing).
16
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SDW5016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SDW5016 in the language / languages: English as an attachment in your email.

The manual is 9,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sennheiser SDW5016

Sennheiser SDW5016 User Manual - German - 57 pages

Sennheiser SDW5016 User Manual - Dutch - 57 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info