618312
9
Zoom out
Zoom in
Previous page
1/40
Next page
Putting the S1 DIGITAL into operation
8 | S1 DIGITAL
Putting the S1 DIGITAL into operation
Connecting the headset to the intercom
Powering the headset
There are different options for powering the headset:
Connection to the on-board DC power supply system (12 35 V
DC
) via
a mounted 3-pole XLR socket or the cigarette lighter socket
Power supply via two batteries/rechargeable batteries inserted in the control
unit (to be ordered separately)
Connection via a 3-pole XLR socket
The Adapter-P-XLR-3 adapter cable (optional accessory available from your
Sennheiser partner) allows you to connect the headset to the on-board DC power
supply system (12 – 35 V
DC
) via a mounted 3-pole XLR socket.
Connect the jack plugs of the control unit
to the corresponding jack sockets of your
intercom.
Jack plug of the control unit Jack socket of the intercoms
5.25 mm jack plug L Microphone input
¼” (6.35 mm) jack plug M Headphone output
CAUTION
Danger of short circuit!
Technical defects can cause a short circuit.
Before putting the headset into operation, ensure that the socket of the on-
board DC power supply system is protected by a 1 A fuse.
Have a 3-pole XLR socket (optional accessory)
mounted by a technician qualified to perform this
type of installation.
Connect the Adapter-P-XLR-3 adapter cable to the
mounted 3-pole XLR socket.
Connect the hollow jack plug of the adapter cable
to the hollow jack socket on the control unit.
M
L
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser S1 DIGITAL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser S1 DIGITAL in the language / languages: English as an attachment in your email.

The manual is 11,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info