233014
14
Zoom out
Zoom in
Previous page
1/30
Next page
13
Putting the MM 450 into operation
Pairing the MM 450 with an audio source
When switching the headset on for the first time, it will automatically go
into pairing mode. The headset is waiting to be paired with a Bluetooth
enabled device (see page 12).
̈ Press the Master button and keep it pressed until the LED
alternately flashes blue and red.
̈ On your audio source, activate the Bluetooth function “Add a new
device”.
̈ Proceed as described in the instruction manual of the audio source.
If a suitable audio source is found, the devices will exchange device
identification information. The LED flashes 3 times blue and you hear
an ascending beep. The devices have identified each other and the headset
is paired with the audio source.
If no device is found within approx. 5 minutes, the LED flashes
3 times red and you hear a descending beep. The headset will then try for
3 minutes to connect to one of the up to 8 previously paired audio sources.
If this fails, the headset automatically switches off after 60 minutes.
̈ In this case, repeat the necessary steps to pair the headset with the
audio source again.
Switching the “Bluetooth connection” flashing on/off
̈ Switch the headset off (see “Switching the MM 450 off” on page 11).
To switch the flashing on during a Bluetooth connection:
̈ Press the Master button and keep it pressed until the LED
alternately flashes blue and red.
̈ Briefly press the Volume button .
To switch the flashing off during a Bluetooth connection:
̈ Briefly press the Volume button .
Disconnecting the Bluetooth connection
̈ Make sure that your headset is switched off (see
“Switching the MM 450 off” on page 11).
5
1
1
PIN code
When the audio source prompts for a password or PIN code,
enter the default PIN code “0000”.
1
5
1
3
6
The Bluetooth button ´ is backlit, indicating the current
setting. The backlighting goes off after a short time to
conserve energy.
̈ Press any button on the headset to display the current
setting of the Bluetooth function.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser mm 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser mm 450 in the language / languages: English as an attachment in your email.

The manual is 10,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info