233006
15
Zoom out
Zoom in
Previous page
1/120
Next page
9
Putting the MM 100 into operation
If a certain Bluetooth connection cannot be established, because the corresponding Bluetooth device is switched
off or out of range, you can manually re-establish the connection as follows:
̈ Switch off the Bluetooth visibility of all Bluetooth devices in the vicinity, except for the Bluetooth device you
want to connect to.
̈ Press the Play/Pause button º.
The LED ¿ flashes 3 times per second, indicating that the headset is in searching mode.
When the headset and the Bluetooth device detect each other, the connection is established. A high confir-
mation beep is heard in the headset.
Switching the headset off
The headset switches off automatically 60 minutes after the last Bluetooth connection has ended (idle mode).
To manually switch the headset off:
̈ Press and hold the Play/Pause button º for 2 seconds.
A descending confirmation beep is heard in the headset and the LED ¿ flashes red twice, indicating that the
headset is switched off.
Pairing and volume settings are saved automatically when the headset is switched off.
Pairing the headset
You can pair the headset to up to 8 devices.
Bluetooth devices supporting:
the advanced audio distribution profile (A2DP), e.g. a music mobile phone, a portable music player or laptop
(Windows Vista with update as of April 2007 or Mac OS X Leopard)
the hands free (HFP) or headset (HSP) profile, e.g. mobile phones
Once you have paired the headset to a Bluetooth device, the headset automatically connects to the last paired
Bluetooth device each time this device and the headset detect each other.
Pairing to a mobile phone Before pairing to a mobile phone, make sure:
that the headset’s battery has been charged as described under “Charging the headset battery” on page 7,
that your mobile phone is switched on and Bluetooth visibility is enabled,
that the headset is switched off and placed close to the mobile phone (approx. 20 cm or 7”).
To enter pairing mode:
̈ Press and hold the Play/Pause button º for 5 seconds.
The LED ¿ flashes alternatingly in red and blue, indicating that the headset is in pairing mode.
̈ Once the headset is detected by the mobile phone, select “MM 100” and connect.
When the Bluetooth connection is successfully established, the headset is identified as “MM 100” on the
mobile phone display.
¿
º
The headset saves up to 8 Bluetooth connection profiles of Bluetooth devices with which it has
been paired. If you want to re-establish a connection with a device with which the headset has
been paired, the connection needs to be established from this device (for details, refer to the
manual of the Bluetooth device). Before doing so, make sure that the last paired device is discon-
nected.
º
2 s
¿
º
5 s
¿
If the headset is already switched on and is in standby or idle mode, you can enter pairing mode
by pressing and holding the Next button » or Prev. button · for 5 seconds.
Kopie von 090603_MM100_532892_0409_SP7_PRT.pdf 15Kopie von 090603_MM100_532892_0409_SP7_PRT.pdf 15 04.11.2009 11:16:4404.11.2009 11:16:44
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser mm 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser mm 100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info