690727
4
Zoom out
Zoom in
Previous page
1/29
Next page
IE 80S BT
Bluetooth® ear-canal headphones
IEN BT, I
E 80 S
Instruction manual
Use the search function, the navigation (left) or the following links:
Start
“Product overview”
“Getting started”
“Using the headphones”
“FAQ/If a problem occurs ...
“Specifications”
Sennheiser electronic GmbH & Co. KG
Am Labor 1
30900 Wedemark
Germany
www.sennheiser.com
Version: 06/19 A01
Important safety instructions
2 | IE 80S BT
Important safety instructions
Read this instruction manual carefully and completely before
using the product.
Always include this instruction manual when passing the product
on to third parties.
Do not use an obviously defective product.
Only use the product in environments where Bluetooth wireless
transmission is permitted.
Preventing damage to health and accidents
Protect your hearing from high volume levels. Permanent
hearing damage may occur when headphones are used
at high volume levels for long periods of time. Sennheiser
headphones sound exceptionally good at low and medium volume
levels.
The product generates stronger permanent magnetic
fields that could cause interference with cardiac pace-
makers, implanted defibrillators (ICDs) and other
im
plants. Always maintain a distance of at least 3.94"/10 cm
between the product component containing the magnet and the
cardiac pacemaker, implanted defibrillator, or other implant.
Do not insert the earphones too deep into your ears and never
insert them without ear adapters. Always remove the earphones
slowly and carefully from your ears.
Keep the product, accessories and packaging parts out of reach
of children and pets to prevent accidents. Swallowing and chok-
ing hazard.
Do not use the product in an environment that requires your spe-
cial attention (e.g. in traffic or when performing skilled jobs).
Preventing damage to the product and malfunctions
Always keep the product dry and do not expose it to extreme tem-
peratures (hairdryer, heater, extended exposure to sunlight, etc.)
t
o avoid corrosion or deformation.
Use only attachments/accessories/spare parts supplied or rec-
ommended by Sennheiser.
Clean the product only with a soft, dry cloth.
Safety instructions for Lithium-Polym
er rechargeable batteries
WARNING
If abused or misused, the rechargeable batteries may leak.
In extreme cases, they may even present a risk of:
•explosion,
fire development,
heat generation,
•smoke or gas development.
Only use rechargeable batteries and chargers
recommended by Sennheiser.
Charge products with built-in rechargeable batteries at
ambient temperatures between 10 and 40°C/50 and
104°F.
Do not heat above 60 °C/140 °F, e.g. do not expose to
sunlight or throw into fire.
When not using the product for extended periods of
time, charge its built-in rechargeable battery regularly
(about every 3 months).
Switch rechargeable battery-powered products off after
use.
Dispose of defective products with built-in rechargeable
batteries at special collection points or return them to
your specialist dealer.
Important safety instructions
IE 80S BT | 3
Notes on data collection and processing and on firmware updates
This product stores individual settings such as the volume and the
Blu
etooth addresses of paired devices. This data is required for the
operation of the product and is not transferred to Sennheiser or com-
panies commissioned by Sennheise
r and is not processed.
Using the “Sennheiser Smart Control” ap
p, you can update the firm-
ware of the product for free via an Internet connection. If the device
on
which the app is installed is connected to the Internet, the follow-
ing data is automatically transferred to and processed by Sennheiser
se
rvers in order to provide and transfer suitable firmware updates:
MAC address, Bluetooth Low Energy UUID, Bluetooth name of the
product, firmware version of the product and version of the app. The
data will only be used as specified and will not be stored perma-
nently.
If you do not want this data to be transferred and processed, do not
c
onnect to the Internet.
Intended use/Liability
These headphones have been designed as an accessory for Blue-
tooth compliant devices. They are intended for wireless audio com-
munication such as music playback an
d phone calls via Bluetooth
wireless technology.
It is considered improper use when the product is used for any appli-
cation not named in the corresponding product documentation.
Sennheiser does not accept liability for damage arising from misuse
or improper use of this pr
oduct and its attachments/accessories.
Sennheiser is not liable for damages to USB devices that are not con-
sistent with the USB specifications. Sennheiser is not liable for dam-
ages resulting from the loss of connection
due to flat or overaged
rechargeable batteries or exceeding the Bluetooth transmission
range.
Before putting into operation, please observe the respective coun-
try-specific regulations.
Package contents
4 | IE 80S BT
Package contents
Earphones (IE 80 S)
Detachable Bluetooth® Neckband (IEN BT)
Carry case
USB charging cable with USB-C and
USB-A connector, approx. 1,0 m
Ear adapter set made of:
silicone (size S, M (pre-mounted upon delivery), L)
lamellar silicone (size S, M, L)
memory foam from Comply (siz
e S, M, L)
Cleaning tool / bass adjustment tool
Quick guide
Safety guide
Online you can find:
this detailed instruction manual and ad
ditional information
(www.sennheiser.com/download)
the Sennheiser Smart Control app for configuring the head-
phones and for additional functions
(www.sennheiser.com/smartcontrol)
You can find a list of accessories on the IE 80S BT product page
at www.sennheiser.com.
Contact your local Sennheiser partner: www.sennheiser.com >
“Service & Support”.
Product overview
IE 80S BT | 5
Product overview
Headphones
IE 80S BT
ON
245
3
8 9 00
A B C
2
3
1
67
OFF
PAIRING
MUSIC
TELEPHONE
B
4
Ear hooks
Earphones (IE 80 S)
Ear adapters (interchangeable)
Bass control
Detachable Bluetooth® Neckband (IEN BT)
USB-C socket for charging the rechargeable battery
Cover for USB-C socket
Voice assistant button
LED
Microphone
Volume + button (volume up)
Product overview
6 | IE 80S BT
Overview of the LED indications of the
headphones
LED Meaning; the headphones
pulses yellow are being charged
lights up green are fully charged
lights up green
for approx. 3 sec
are switched on
flashes red-blue
for approx. 1 min
are in Bluetooth pairing mode
lights up blue
for approx. 3 sec
are connected to a device via
Bluetooth
lights up red
for approx. 3
sec
connection has been interrupted
flashes blue
are not connected to a device via
Bluetooth
flashes red
quickly
rechargeable battery is almost
empty
lights up red
System error – perform a restart (>
26
)
flashes red 3x are switched off
If the LED does not light up immediately during charging, clean
the charging socket and charge the headphones until the LED
lights up again (>
10).
Multi-function button for:
•music functions
call functions
pairing function
Pressing for 2 sec: headphones switch ON
Pressing again for 2 sec: activates Bluetooth pairing mode
Pressing for 3 sec: headphones switch OFF
Volume - button (volume down)
Product overview
IE 80S BT | 7
Notes on voice prompts
The headphones output voice prompts for the following functions.
Using the Smart Control app, you can change the language of the
voice prompts, choose between voice prompts and beep sounds, or
deactivate the status messages with a few exceptions (e.g.
rechargeable battery is empty).
Voice prompt Meaning/headphones
“Power on”
are switched on
“Power off” are switched off
“Device (1) (2) connected”
are connected to device 1 or 2
“No connection” are not connected via Bluetooth
“Pairing”
are in Bluetooth pairing mode
“Pairing successful” Bluetooth pairing successful
“No device found”
cannot connect to a paired device
“Call rejected” incoming call rejected
“Call ended”
call ended
“Mute on” microphone is muted, active call is
put on hold
“Mute off”
microphone is reactivated
“More than xx % battery left” rechargeable battery has the stated
charge level
“Recharge headset” rechargeable battery is empty –
re
charge the headphones
Notes on beeps/acoustic signals
The headphones output beeps/acoustic signals for the following
functions.
Acoustic signal Meaning/headphones...
2x low-pitched beep
minimum volume is reached
2x high-pitched beep maximum volume is reached
Getting started
8 | IE 80S BT
Getting started
1. Charging the rechargeable battery
The headphones' rechargeable battery is not fully charged upon
delivery. Before using the headphones for the first time, charge the
rechargeable battery for a complete charging cycle without interrup-
tion (> 10).
USB-C USB-A
2. Installing the Smart Control app on your
smartphone
The Sennheiser Smart Control app allows you to use all functions
and settings of the headphones and to e.g. adjust the sound to your
liking using the equalizer (> 13).
3. Connecting the headphones to a Bluetooth
device
Connect the headphones to your smartphone via Bluetooth
(> 11).
Getting started
IE 80S BT | 9
4. Selecting suitable ear adapters for optimum
fit of the headphones
LMS
LMS
LMS
Silicone
ear adapters
Comply
ear adapters
Lamellar silicone
ear adapters
The perceived sound quality and bass performance depends to a
large extent on the correct fit of the headphones in the ear.
Test which ear adapter size gives you the best sound quality and
the best wearing comfort.
You can choose between:
silicone ear adapters,
lamellar silicone ear adapters and
memory foam ear adapters from Comply™.
All ear adapters are available in size S, M and L. The ear adapters
must fit snugly in the ear canal and completely seal your ears (>
14).
Loop the ear hook over your ear from behind.
Insert the earphones at a slight angle into the ears and twist them
slightly into the ear canal so that they fit comfortably and snugly
in the ear canal.
Using the headphones
10 | IE 80S BT
Using the headphones
Information on the rechargeable battery
and the charging process
The headphones have a built-in rechargeable battery. A complete
charging cycle takes about 1.5 hours. Before using the headphones
f
or the first time, charge the rechargeable battery for a complete
charging cycle without interruption.
When the headphones are being charged, the LED lights up (> 6).
When the battery charge drops to a critical level, a voice prompt asks
y
ou to recharge the headphones (“Recharge headset”).
Sennheiser recommends using the supplied USB cable and a com-
patible standard USB power supply for charging the headphones.
Charging the headphones' rechargeable
battery
USB-A
USB-C
1,5 HRS
Pulsing
USB-C
USB Micro-B
1. Connect the USB-C connector of the USB cable to the USB socket of
the headphones.
2. Connect the USB-A connector to a corresponding sock
et of a USB
power source (to be ordered separately). Make sure that the USB
power source is connected to the power supply system.
The charging process of the headphones b
egins. The LED displays
the charge status:
LED Meaning
pulses red Rechargeable battery is being charged
(charge level is very low)
pulses yellow Rechargeable battery is being charged
lights up
green
Rechargeable battery is fully charged
flashes red A charging error/battery error has
occurred (> 24)
Using the headphones
IE 80S BT | 11
Connecting the headphones to a
Bluetooth device
To be able to use the Bluetooth wireless connection, you must regis-
ter both devices (headphones and e.
g. smartphone) via the device
settings of your smartphone. This process is called pairing.
If operation differs from the steps mentioned, also refer to the
instru
ction manual of the Bluetooth device you are using.
If you switch on the headphones for the first time, they auto-
matically switch to pairing mode.
Information on the Bluetooth wireless
connection
The headphones are compatible with Bluetooth 5.0.
If your audio source supports one
of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX LL, aptX HD, LHDC or AAC. Otherwise the head-
phones will play your music in normal audio quality (SBC).
Paired devices establish the Bluet
ooth wireless connection immedi-
ately after switch-on and are ready for use.
On switch-on, the headphones automatically try to connect to the
la
st two connected Bluetooth devices. The headphones can save the
connection profiles of up to eight Bluetooth devices with which they
have been paired.
If you pair the headphones with the nint
h Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over-
written. If you want to re-establish a connection with the overwritten
Blu
etooth device, you have to pair the headphones again.
Paired and connected Bluetooth device
Paired Bluetooth device (currently not connected)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser IE 80S BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser IE 80S BT in the language / languages: English as an attachment in your email.

The manual is 5,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sennheiser IE 80S BT

Sennheiser IE 80S BT User Manual - German - 30 pages

Sennheiser IE 80S BT User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info