690256
27
Zoom out
Zoom in
Previous page
1/41
Next page
Using additional functions
Flex 5000 | 27
Using additional functions
The following additional functions are not required for normal use
of the wireless headphone system. You can, however, extend the
potential use of the system and adjust some of the functions to
your individual needs.
Pairing one or several receivers with the transmitter
The receiver and the transmitter of your wireless headphone
system are factory pre-paired. The following steps are only neces
-
sary if you want to pair additional receivers with the transmitter.
You can simultaneously use up to 4 paired receivers with your trans-
mitter. All other paired and switched-on receivers cannot connect to
the transmitter.
Option A (contact pairing)
Place the receiver into the transmitter’s charging compartment.
The receiver is paired with the transmitter.
Option B (proximity pairing)
1 Place the receiver as close as possible to the transmitter.
2 Simultaneously press and hold the volume buttons +/ until the
Receiver status
LED flashes red. Once paring is completed, the
Receiver status
LED flashes green and the
Transmitter status
LED
flashes white.
Release the buttons.
1...4
If more than one receiver is connected to the transmitter, the
remaining operating time/charge status and the hearing pro-
file cannot be displayed. In addition, the balance and a hearing
profile cannot be adjusted. These functions can only be used/
adjusted when only one receiver is connected to the transmit-
ter.
1...4
21
+
+
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser FLEX 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser FLEX 5000 in the language / languages: English as an attachment in your email.

The manual is 7,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sennheiser FLEX 5000

Sennheiser FLEX 5000 User Manual - German - 39 pages

Sennheiser FLEX 5000 User Manual - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info