675943
14
Zoom out
Zoom in
Previous page
1/27
Next page
Putting the EZX 60 into operation
12
If a certain Bluetooth connection cannot be established, because the
corresponding Bluetooth device is switched off or out of range, you can
manually re-establish the connection as follows:
Switch off the Bluetooth visibility of all Bluetooth devices in the
vicinity, except for the Bluetooth device you want to connect to.
Press the multi-function button .
The LED flashes once every 5 seconds, indicating that the headset is
in searching mode.
When the headset and the Bluetooth device detect each other, the
connection is established. The LED flashes 3 times and a high
confirmation beep is heard in the headset.
Switching the headset off
The headset switches off automatically 1 hour after the last Bluetooth
connection has ended (standby mode).
To manually switch the headset off:
Press and hold the multi-function button for 5 seconds.
A descending confirmation beep is heard in the headset and the LED
flashes 3 times, indicating that the headset switches off.
Pairing and volume settings are saved automatically when the headset
is switched off.
Pairing the headset
You can pair the headset to up to 8 Bluetooth compliant devices. These
Bluetooth devices (mobile phones or similar devices) must support the
“hands free profile” (HFP) or “headset profile” (HSP).
Once you have paired the headset to a Bluetooth device, the headset auto-
matically connects to the last paired Bluetooth device each time this
device and the headset detect each other.
Pairing to a mobile phone Before pairing to a mobile phone, make sure:
that the headset’s battery has been charged as described under
“Charging the headset battery“ on page 10,
that your mobile phone is switched on and Bluetooth visibility is
enabled,
that the headset is switched off and placed close to the mobile phone
(approx. 20 cm or 7”).
The headset saves up to 8 Bluetooth connection profiles of
Bluetooth devices with which it has been paired. If you want
to re-establish a connection with a device with which the
headset has been paired, the connection needs to be estab-
lished from this device (for details, refer to the manual of the
Bluetooth device). Before doing so, make sure that the last
paired device is disconnected.
5 s
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser EZX 60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser EZX 60 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info