580810
32
Zoom out
Zoom in
Previous page
1/44
Next page
31
Using the headset system
Pairing the headset to third party DECT GAP telephones
̈ Place the DW Pro1/Pro2 headset at a maximum distance of 1 m from
the third party base station.
̈ Simultaneously press and hold the headset’s LINK button and
AUDIO button for 5 seconds.
The headset switches to setting mode/GAP pairing mode and the
HE
ADSET LED flashes blue/red.
̈ Set the third party base station to GAP pairing mode (see the instruc-
tion manual of the third party base station).
The headset pairs to the third party base station. If pairing was
successful, the HEADSET LED
goes off.
The standard code for DW Pro1/Pro2 is “0000”.
Pairing is not successful If pairing is not successful within 60 seconds, the DW Pro1/Pro2 headset
switches to standby mode.
̈ For information on how to pair the headset to the third party base
st
ation, refer to the instruction manual of the base station.
Charging an additional headset
If you wish to charge an additional headset (heads
et b) in the base station
while you are using your headset (headset a):
̈ Make sure that a wireless link is established between headset a and
base stat
ion (the LINK LED ¿ on the base station lights up blue).
̈ Place haedset b in
to the base station.
Headset a can continue
to connect to and disconnect from the base
station and its use is not restricted while headset b is being charged.
If you leave the DECT range
If you leave the DECT range during a call, the audio quality deteriorates.
When the link breaks down completely, you hear a descending sequence
of beeps in the headset and the LINK LED ¿ on the base station lights up
red.
To resume the call:
̈ Re-enter the DECT range of the headse
t system within 60 seconds.
As soon as the headset re-establishes the wireless link to the
base
station, you hear a ring tone in the headset.
̈ Press the LINK button
on the headset to resume the call.
If you are using a handset lifter/electronic hook switch or if your
softphone supports call control, the call will automatically be ended
60
seconds after leaving the DECT range.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser DW Pro1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser DW Pro1 in the language / languages: English as an attachment in your email.

The manual is 9,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sennheiser DW Pro1

Sennheiser DW Pro1 Installation Guide - English - 21 pages

Sennheiser DW Pro1 Installation Guide - German - 21 pages

Sennheiser DW Pro1 User Manual - German - 45 pages

Sennheiser DW Pro1 Installation Guide - Dutch - 21 pages

Sennheiser DW Pro1 User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info