759069
5
Zoom out
Zoom in
Previous page
1/6
Next page
11/2016
- 5 -
Copyright © 2016, Fast ČR, a.s.
EN Fast boil kettle
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly, even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in the manner described in this user’smanual. Keep this usersmanual in
asafe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or
warranty card for at least the duration of the legal liability for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE FAST BOIL KETTLE
A1 Lid
A2 Safety lid locking mechanism
A3 Spout with aremovable lter inside
A4 Base with acentral connector
A5 Handle
A6 Water level mark
A7 0/Iswitch (o/on) with power indicator light
BEFORE FIRST USE OF THE FAST BOIL KETTLE
1. Remove all wrapping material from the fast boil kettle and its base A4.
2. Fill the kettle with clean water up to the maximum water mark. Boil the water and empty the contents of the kettle. Repeat this process
2 to 3 times.
Note:
To boil water in the fast boil kettle proceed according to the instructions in chapter Using the fast boil kettle.
3. Now the kettle is ready for operation.
USING THE FAST BOIL KETTLE
1. Set the desired power cord length and push it into the groove in the base A4. Place the base A4 on astable, even and clean surface.
2. Fill the kettle with the required amount of water. You may ll it through the spout A3 or through the opening after lifting the lid A1. The water
level must reach at least the minimum mark (0.8l) but must not exceed the maximum mark (2.5l). After lling the kettle, check that the lid A1
is properly closed and locked in place.
Attention:
Do not ll the kettle when it is placed on the base A4.
3. Place the kettle on the base A4. Insert the power plug into apower socket and set the switch A7 to position I (On) to start the kettle.
The power indicator light will be lit.
Attention:
Do not turn on the kettle when it is empty. The incorrect use of the kettle may negatively aect its lifetime. If you accidentally turn on
the kettle without water, the thermostat will, after reaching acertain temperature, interrupt the electric circuit. The switch A7 will move
to position 0 (O) and the indicator light will turn o. The kettle can be used again after several minutes, once the heating bottom has
cooled down.
4. As soon as the water boils, the kettle will turn o automatically and the power indicator light will turn o.
Note:
The operation of the kettle can be interrupted at any time by setting the switch A7 to position 0 (O).
5. Pour the boiled water into aprepared container, cup or mug. Make sure that the kettle remains in avertical position when it is carried,
particularly if it is lled all the way up to the maximum mark.
6. If you wish to rell the kettle, be especially careful when opening the lid A1 to avoid scalding by the escaping steam.
7. After you nish using it, disconnect the power cord from the power socket. Empty the kettle and allow it to cool down.
CLEANING AND MAINTENANCE
Before cleaning it, make sure that the kettle is turned o, disconnected from the power socket, and allow it to cool down.
To clean the external parts of the kettle, use adry cloth or acloth dipped in aweak solution of neutral kitchen detergent. After applying the
kitchen detergent, wipe the surface with alightly damp cloth and then wipe dry.
To clean the base A4 use only adry cloth.
Never use solvents, abrasive cleaning agents, etc.
Cleaning the lters
The removable lter serves to capture limescale, and thereby prevents it from being poured into acup together with the water. Regularly clean
the lter under running water using ane nylon brush or submerge it for several hours into avinegar – water solution (recommended dilution
ratio 1:2). After applying the solution, rinse the lter under clean running water.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SWK 2510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SWK 2510 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor SWK 2510

Sencor SWK 2510 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info