759068
7
Zoom out
Zoom in
Previous page
1/8
Next page
Electric Kettle
SWK 1785BK
EN
EN-7
2016
08/2016
USING THE KETTLE
1. Set the desired length of the power cord. Push the power cord into the groove in the base. Place
the base on a stable, even and clean surface.
2. Fill the kettle with the required amount of water. The water level must reach at least the minimum
mark (0.5 l) and must not exceed the maximum mark (1.7 l). You may fill the kettle through the
spout or through the opening after lifting the lid. The lid can only be opened once the lid lock,
located in the middle of the lid, is released. After filling the kettle with water, close the lid and push
it down so that it is secured in the closed position.
Warning!
Never fill the kettle when it is located on the base.
If the electric kettle is overfilled, then boiling water could splash out.
3. Place the kettle on the base. Insert the power plug into an electrical power socket. Check that the
lid of the kettle is closed.
4. Start the kettle by setting the switch to position I (On). The inside of the kettle will be illuminated.
Attention:
Do not turn on the kettle when it is empty. The incorrect use of the kettle may negatively affect
its lifetime. If you accidentally turn on the electric kettle without water, the thermostat will,
after reaching a certain temperature, interrupt the electric circuit and the kettle light inside will
turn off. The kettle can be used again after several minutes, as soon as its stainless steel bottom
has cooled down.
5. When the water starts to boil, the kettle will turn off automatically and the kettle light inside will
turn off. Before taking the kettle off the base, check that it has turned itself off automatically. If it
has not automatically turned itself off, turn off the kettle manually by setting the switch to position
0 (Off).
Note:
The operation of the kettle can be interrupted at any time by setting the switch to position 0
(Off).
6. Pour the boiled water into a prepared container, cup or mug. Make sure that it remains in a vertical
position when it is carried, particularly if it is filled all the way up to the maximum mark.
If you wish to open the lid to refill the kettle, first empty all the contents of the kettle so that you
are not scalded by the escaping steam.
7. After you finish using the kettle, disconnect the power cord from the el. power socket. Empty the
kettle and allow it to cool down.
CLEANING AND MAINTENANCE
Regularly remove water scale deposits from inside the kettle based on how frequently the kettle
is used. During standard use of the kettle (3 to 5 times per day), we recommend to remove water
scale deposits:
once per month in areas with hard and very hard water;
once every two to three months in areas with soft and medium hard water.
To remove water scale deposits it is possible to use:
8% white vinegar, generally available in stores. Put ½ l of vinegar into the kettle and allow it
to settle for 2 hours without boiling. Then empty the kettle and before further use, boil clean
water in it four to five times.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SWK 1785 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SWK 1785 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info