759104
3
Zoom out
Zoom in
Previous page
1/6
Next page
02/2019
- 3 -
Copyright © 2019, Fast ČR, a.s.
The surface of the heating element and kettle body remains hot after use
due to residual heat. Do not touch the hot surface.
When filling the kettle, make sure that the water level covers at least the
minimum mark and also that it does not go over the maximum mark.
Do not wash the kettle or its base under running water and do not submerge
it or its base in water or any other liquid
Before connecting the kettle to a power socket check that the nominal
voltage matches the electrical voltage in the socket.
Connect the kettle only to aproperly grounded socket.
Do not place the kettle on window sills, kitchen sink drainboards or unstable
surfaces. Always place it on astable, even and dry surface.
Do not place the kettle on equipment or devices that are sources of heat.
Never use the kettle in the near vicinity of a bath, shower or swimming
pool.
Use the kettle exclusively for boiling drinking water. Do not use it to heat
other liquids or food.
Always take the kettle off the base before filling it.
Check that the lid is securely closed before starting the kettle. Do not open
the lid or handle it in any way while the water is boiling.
Use the handle for lifting and carrying the kettle.
Be especially careful when pouring water out of the kettle to avoid scalding
by the boiling water or steam.
Always disconnect the kettle from the power socket when leaving it without
supervision, when not using it and before moving or cleaning it.
Clean it according to the instructions in chapter Cleaning and maintenance.
Disconnect the kettle from the power socket by pulling on the plug, never
pulling on the power cord. Otherwise, this could damage the power cord
or the socket.
To avoid the danger of injury by electrical shock, do not repair the kettle
yourself or make any adjustments to it. Have all repairs performed at an
authorised service centre. By tampering with the appliance, you risk
voiding your legal rights arising from unsatisfactory performance or quality
warranty.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SWK 1749 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SWK 1749 in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info