Manual Sencor SWK 1592 (page 6 of 7) (English)

759146

Zoom out

Zoom in

1/7

- 6 - 08/2020

EN Variable temperature

electric kettle

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ Carefully unpack the appliance and take care not to throw away any part of

the packaging before you find all its parts. We recommend saving the original

cardboard box, packaging material, purchase receipt and responsibility statement

of the vendor or warranty card for at least the duration of the legal liability

for unsatisfactory performance or quality. In the event of transportation, we

recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION

A1 Lid

A2 Spout

A3 Digital display

A4 Control panel

A5 Base stand with central connector

A6 Open lid button

A7 Handle

A8 Feet

B1 ON/OFF button

When this button is pressed while

the kettle is turned off, it will start

flashing and set the kettle into

stand-by mode. Pressing this button

when the kettle is in the stand-by

mode will turn the kettle off.

B2 BOIL mode (boil water)

Heats water to 100°C and

automatically turns off.

B3 KEEP WARM mode (maintains

atemperature)

Heats water to aset temperature

and then automatically maintains

this temperature for 2 hours.

B4 TEMP SEL mode (temperature

selection)

Enables setting the heating of

water in the range 40-90°C in 10°C

increments.

BEFORE FIRST USE

■ Remove all wrapping material from the electric kettle and its base stand.

■ Fill the kettle with clean water up to its maximum water mark (MAX) inside the

kettle. Boil the water and empty the contents of the kettle. Repeat this process 2 to

3 times. To boil water, proceed according to the instructions in chapter Operation.

OPERATION

Attention:

The electric kettle is intended only for heating water. Never heat

any other liquids or substance in it.

■ Place the base stand on astable, even and clean surface. Insert the power plug into

apower socket. The kettle will beep but neither the display nor the buttons will

be lit.

■ Fill the kettle with the required amount of water. You may fill it through the spout

or through the opening after lifting the lid. To open the lid, press button A6. The

water level must reach at least the minimum mark (MIN) but must not exceed the

maximum mark (MAX). After filling it up, properly close the lid and place it on the

central connector of the base stand.

Attention:

Never fill the kettle when it is placed on the base stand.

Turning on and stand-by mode

■ Turn on the kettle by pressing button B1 (ON/OFF). The kettle will enter stand-by

mode, meaning that it is ready for operation. Button B1 (ON/OFF) will start flashing

and the current water temperature will be shown on the display.

■ If you do not press any button within three minutes of turning on the kettle, it will

automatically turn off, and to turn it on again it is necessary to press button B1 (ON/

OFF).

Note:

If the kettle is taken off the base stand in the stand-by mode or any other

mode, the symbol – – – – will appear on the display. If you return the kettle

to the base stand within 30 seconds of lifting it off, the set temperature or

selected mode will be retained. If you return it later than this, the kettle

will enter the stand-by mode.

Heat Water to 100°C

■ When button B2 (BOIL) is pressed in the stand-by mode, the display will first show

100°C, and afew moments later the current temperature of the water. The water

will then start being heated and button B1 (ON/OFF) will remain permanently lit.

Attention:

Never start the kettle empty without water. The incorrect use of

the kettle may negatively affect its working order and lifetime.

■ When the temperature of the water reaches 100 °C, the kettle will beep and

automatically switch to the stand-by mode and button B1 (ON/OFF) will turn off.

Note:

The operation of the kettle can be stopped at any time by pressing

button B1 (ON/OFF).

■ Pour the boiled water into aprepared container, cup or mug. When carrying it, hold

the kettle upright, particularly when it is filled all the way up to the maximum mark.

■ If you wish to fill the kettle again and start heating immediately after pouring in

the water, wait approximately 30–60 seconds. When opening the lid, be especially

careful to avoid scalding yourself with boiling water or steam.

Heating water to arequired temperature

■ The kettle enables water to be heated to atemperature in the range from 40°C to

90°C. Select the temperature using button B4 (TEMP SEL).

■ Repeatedly press button B4 (TEMP SEL) to select the required temperature. The

selected temperature value will always appear on the display first, and after afew

moments the current water temperature will be shown and heating will commence.

When the temperature is reached, the kettle will beep and switch to the maintain

set temperature mode.

■ If the current temperature of the water in the kettle is higher than the temperature

you set, the kettle will beep and turn off.

Maintaining temperature (Keep warm)

■ When button B3 (KEEP WARM) is pressed, the temperature 90°C will always appear

on the display and this temperature will be maintained. If you wish to maintain

adifferent temperature, use button B4 (TEMP SEL) to set atemperature in the range

40–90°C.

■ The selected temperature is maintained for 2 hours. When this time elapses, the

kettle will beep and switch to the stand-by mode.

■ Maintaining temperature can be stopped at any time by pressing button B1 (ON/

OFF).

Note:

When using the maintaining temperature mode, consider whether this

function is really necessary. You will contribute to lowering the impact of

electrical appliances on the environment.

Turning off

■ To turn off the kettle after use, press button B1 (ON/OFF). The button will turn off

and the kettle will turn off.

■ When not using the kettle, empty it out and place it away from the base stand.

■ When not using the kettle for an extended period of time, we recommend

disconnecting the power cord from the power socket.

PROTECTION AGAINST BOILING WITHOUT WATER

■ If you accidentally turn on the kettle without water, the thermostat will, after

reaching a certain temperature, interrupt the electric circuit. The kettle will turn

off, button B1 (ON/OFF) will turn off and the display will show the message ERR.

The kettle can be used again after several minutes, once the heating bottom has

cooled down.

Attention:

Even though the kettle is equipped with protection against boiling

without water, do not turn it on when empty. The incorrect use of

the kettle may negatively affect its working order and lifetime.

CLEANING AND MAINTENANCE

Attention:

Prior to any cleaning or maintenance, always disconnect the

power cord of the base stand from the power socket and allow

the kettle to cool down.

Do not wash the kettle, its base stand or power cord under

running water and do not submerge them in water or another

liquid.

■ To clean the external parts of the kettle, use adry cloth or acloth dipped in aweak

solution of neutral kitchen detergent. Never use solvents, cleaning products with an

abrasive effect, etc. After washing, wipe the surface with aclean, lightly dampened

cloth and then wipe dry.

■ Wipe the internal parts of the kettle using asoft sponge or clean cloth dipped in

clean warm water. Do not use detergents or any other chemical agents on the

internal parts. After cleaning the kettle, rinse it out several times with clean water.

■ To clean the base stand, use only adry cloth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SWK 1592 in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SWK 1592 Manual

Product: