758502
5
Zoom out
Zoom in
Previous page
1/7
Next page
05/2017
- 5 -
Copyright © 2017, Fast ČR, a.s.
EN Vacuum Sealer
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in
the manner described in this user’smanual. Keep this user’smanual
in asafe place where it can be easily retrieved for future reference.
We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the vendor
or warranty card for at least the duration of the legal liability for
unsatisfactory performance or quality. In the event of transportation,
we recommend that you pack the appliance in the original box from
the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Tilt-out lid
A2 Sealing strip
Creates astrong seal by
melting.
A3 Latch
serves to lock the lid in the
closed position.
A4 Top gasket
A5 Bottom gasket
A6 Vacuum chamber
A7 Rubber strip
A8 Button for turning air suction
from an external vacuum
container on and off.
A9 Air suction inlet
A10 Latch release button
is located on both sides of
the vacuum sealer.
A11 Hose for sucking air out of
external vacuum containers.
Note:
The appliance is supplied together with 5 vacuum sealer
bags from PA/PE material with dimensions of 20×30cm and
1 vacuum sealer roll from PA/PE material with dimensions
20×200cm.
DESCRIPTION OF THE CONTROL PANEL
B1 Operating mode setting LED
indicators
B2 STOP touch button
for ending operation
B3 MODE touch button
for setting the operating
mode:
NORMAL (standard) for
standard vacuum sealing,
GENTLE for gentle vacuum
sealing of loose foodstuffs.
B4 FOOD touch button for
setting the operating mode:
DRY for vacuum sealing
dry foodstuffs,
MOIST for vacuum sealing
higher moisture foodstuffs.
B5 SEAL touch button
for making astrong seal
with LED indicator signalling
the sealing time
B6 VAC/SEAL touch button
for creating avacuum and
making astrong seal
with LED indicator signalling
the vacuum sealing time
Note:
Certain models are equipped only with buttons B2, B5 andB6.
The appearance of touch buttons and indicators may differ
depending on the model.
WHAT IS THE PURPOSE OF AVACUUM SEALER
When stored in the normal manner, foodstuffs lose their flavour,
aroma and nutrients. Bacteria multiply, moulds form in these
foodstuffs, which leads to their spoilage. The vacuum sealer enables
one to create avacuum package, and the freshness of foodstuffs can
be extended by up to 5 times compared to standard storage methods
without requiring any preservation or other chemicals. Likewise,
vacuum sealing may also shorten marinating times, which usually
take several hours, down to only 20 minutes.
Vacuum sealing can also be used to protect various items against
the entry of water or insects.
VACUUM SEALER BAGS AND ROLLS
The vacuum sealer bags and rolls supplied with this appliance consist
of two layers that provide effective protection against the entry of air
and moisture. This enables one to store foodstuffs fresher for longer.
The inner layer is from PE material. The outer layer is made from PA
material. In these vacuum sealer bags, it is possible to heat foodstuffs
in amicrowave oven or boil in water.
Additional vacuum sealer rolls can be purchased under part number
SVX 300CL.
USING THE VACUUM SEALER
Connect the power cord to apower socket and tilt open the lid A1.
When the power cord is connected to apower socket, the indicators
B1 will be lit. The default operating mode setting is NORMAL and DRY.
1. SEALING FUNCTION
1.1 Fill the vacuum sealer bag with foodstuffs up to max. of its volume.
Insert the bag with the open side into the vacuum sealer so that its
edges extend past the rubber strip A7 by at least 1.5 cm. Check that
the place where the seal will be made is clean, dry and free of creases.
Push the lid A1 down firmly until an audible click is heard.
1.2 Press the SEAL button B5. The LED indicator of button B5 will be lit
and afirm seal will be made under the sealing strip A2. The sealing
process takes approximately 6to10seconds. As soon as the sealing
process is finished, the LED indicator of button B5 will turn off. To
release the lid A1, press buttons A10. Tilt open the lid A1, remove
the bag and check the strength of the seal.
Note:
When using the vacuum sealer role, it is necessary to first make
aseal that will form the bottom of the vacuum sealer bag.
The sealing process can be ended at any time by pressing the
STOP button B2.
2. VACUUM WITH SEALING FUNCTION
2.1 Fill the vacuum sealer bag with foodstuffs up to max. of its volume.
Insert the bag with the open side into the vacuum sealer so that its
edge is located inside the vacuum chamber A6. The bag must not
cover the air suction inlet A9.
2.2 Check that the place where the seal will be made is clean, dry and
free of creases. Push the lid A1 down firmly until an audible click is
heard.
2.3 Depending on the type of foodstuffs that are placed in the bag, set
the operating mode using buttons B3 and B4. Press the VAC/SEAL
button B6. The LED indicator of button B6 will be lit and the air
suction process will start automatically. When acomplete vacuum is
achieved, the air suction process will stop automatically and the LED
indicator of button B6 will turn off. The vacuum sealer will switch to
the sealing mode. This is indicated by the LED indicator of the SEAL
button B5 being lit. Astrong seal will be made under the sealing
strip A2. The whole process takes approximately 10to20seconds.
As soon as the sealing process is finished, the LED indicator of button
B5 will turn off. To release the lid A1, press buttons A10. Tilt open
the lid A1, remove the bag and check the strength of the seal.
Note:
When using the vacuum sealer role, it is necessary to first make
aseal that will form the bottom of the vacuum sealer bag.
In the event that an insufficient vacuum is being created, push
down on the lid A1 for ashort time during the vacuuming
process.
The air suction or sealing process can be ended at any time by
pressing the STOP button B2.
In the event that you do not wish acomplete vacuum to be
created inside the bag, you may manually switch to the sealing
mode by pressing the SEAL button B5.
Attention:
Allow hot foodstuffs to cool down before creating avacuum
package.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVS 1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVS 1010 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info