Manual Sencor SVC 9300 (page 7 of 8) (English)

759478

Zoom out

Zoom in

1/8

05/2019

- 7 -

EN Bagged vacuum cleaner

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases

where you have previously familiarised yourself with the operation of similar types

of appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user’smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event of

transportation, we recommend that you pack the appliance in the original box from

the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Top cover release button

A2 Flexible hose connection hole

A3 Dust bag compartment cover

A4 Inflow hole cover

A5 Accessory cover lid release button

A6 Accessory compartment cover

A7 Vacuum cleaner unit

A8 Automatic power cord winding

button

A9 Stop suction power and select

operating mode button

A10 Power cord

A11 Rear travel wheel

A12 On/Off button

A13 Display

A14 Washable outflow filter (is inserted

inthe grille)

A15 Washable outflow HEPA filter

A16 Removable grille

A17 Inflow filter

A18 Inflow filter grille

A19 Dust bag holder

A20 Dust bag

A21 Flexible hose with remote control

inthehandle

A22 Telescopic metal tube

A23 Turbo brush

A24 Suction power control

A25 Long flexible crevice nozzle

A26 Hard floor nozzle

A27 Mini turbo-brush

A28 Dusting brush

A29 Crevice nozzle

A30 Grooves for the horizontal parking

position

A31 Groove for the vertical parking

position (at the bottom of the

vacuum cleaner)

A32 Floor nozzle with an extensible

brush and DEEP cleaning and EASY

cleaning switch

A33 Flap for extending and retracting

thebrush

DESCRIPTION OF THE REMOTE CONTROL IN THE HANDLE

B1 Battery compartment cover

B2 Vacuum cleaner On/Off button

B3 Increase suction power button

B4 Decrease suction power button

B5 Flexible hose with mechanical

suction power control in the handle,

with an integrated brush

BEFORE FIRST USE

■ Before first use, take the appliance and its accessories out of the packaging material

and remove all promotional labels and stickers. Check that neither the appliance nor

any of its parts is damaged.

INTENDED USE OF THE ACCESSORIES

■ The combination floor nozzle A32 is suitable for vacuuming smooth hard floor areas

and carpets. When vacuuming carpets with ahigher pile, we recommend extending

the floor nozzle travel wheels A32. This makes movement over the vacuumed area

easier. When vacuuming smooth hard floor areas, heavy-duty carpets or carpets with

alow pile, you may leave the wheels retracted. Use flap A33 to extend and retract the

travel wheels. Floor nozzle A32 also has aswitch for extending out atravel roller. This

switch is located in the centre of the floor nozzle A32 and it has two positions - deep

cleaning and easy cleaning. The deep cleaning position (the travel roller is retracted)

is ideal for deep and thorough vacuuming of carpets. The easy cleaning position (the

travel roller is extended) makes movement over the vacuumed surface easier. We

recommend to slightly lift up the floor nozzle A32 when you wish to switch to the

easy cleaning position.

■ The hard floor nozzle A26 ensures perfect and yet gentle vacuuming of smooth

hard surfaces thanks to the brush being from 100 % natural bristles. It can be used

to vacuum floors that are sensitive to scratching such as wooden and floating floors,

tiles, linoleum, etc.

■ The mini turbo-brush A27 is an excellent helper for removing animal fur, hair, etc.,

while at the same time being suitable for vacuuming hard-to-reach places. Its use is

not limited to the home, and can be used for vacuuming the car. Use it to quickly

and effectively remove hair, animal fur and other materials from car seats, upholstery,

pillows and other textile surfaces.

■ The long flexible crevice nozzle A25 serves to vacuum very hard-to-reach places

anywhere in your car.

■ The crevice nozzle A29 can be used for vacuuming hard-to-reach places and the

dusting brush A28 is used for gently vacuuming various types of furniture.

PREPARING FOR USE

■ Make sure that the dust bar A20, inflow filter A17,outflow HEPA filter A15 and the

outflow filter A14 are properly installed.

■ Make sure that the dust bag compartment cover A3 and the accessory compartment

cover A6 are properly closed

■ Insert the end of the flexible hose A21 into the hole A2. Asecure connection of the

flexible hose A21 to the hole A2 is indicated by the locking clips located on the end of

the flexible hose A21 extending out.

Note:

When disassembling, it is necessary to simultaneously press both

locking clips at the end of the flexible hose A21 while at the same time

pulling the hose end A21 out of the hole A2.

■ Connect the telescopic tube A22 to the free end of the flexible hose A21. Asecure

connection of these parts is indicated by aclick.

■ Use the ring to set the ergonomic height of the telescopic tube A22. Pull the ring up or

down to release the extension lock on the telescopic tube A22. Set the desired length

of the telescopic tube A22 by sliding its inner part in or out. When the required length

is set, release the ring and pull on the outer tube. This will lock the inner slider in place.

■ Connect the required nozzle or brush to the free end of the telescopic tube A22. The

long flexible crevice nozzle A25, the mini turbo-brush A27, dusting brush A28 or

crevice nozzle A29 can be attached directly to the end of the flexible hose A21 (after

removing the telescopic tube A21).

INSERTING BATTERIES INTO THE REMOTE CONTROL IN THE

HANDLE

■ In order to use the remote control in the handle, it is necessary to install 2× 1.5V type-

AAA batteries. Remove the battery compartment cover and insert 2× new batteries

of the same type. Ensure that the correct polarity as marked inside the battery

compartment. Attach the battery compartment cover.

■ When not using the remote control in the handle for an extended period of time,

remove the batteries.

Note:

Always use new batteries of the same type. Never combine used and

new batteries or various types of batteries. When not using the vacuum

cleaner for an extended period of time, remove the batteries from the

remote control. Never put the batteries in afire, short circuit them or

damage them in any way. Dispose of them ecologically at the end of

their lifetime. Never throw batteries out with communal waste.

USING YOUR VACUUM CLEANER

■ Pull on the power plug to wind out the required length of the power cord and connect

it to apower socket.

Attention:

The yellow mark on the power cord indicates that it is close to

its end. The red mark indicate the very end of its length. Do not

attempt to pull the power cord past this mark.

■ To start the vacuum cleaner, press button A12 on the vacuum cleaner unit. After

turning on the vacuum cleaner, the display A13 will be lit. Using buttons A9 to set

the suction power depending on the intended use of the vacuum cleaner – see table

“Suction power table”.

■ When you have finished using it, turn off the vacuum cleaner by pressing the

button A12 on the vacuum cleaner unit. Disconnect the power cord from the power

socket. To wind the power cord back into the vacuum cleaner, press button A8. It is

recommended to hold the power cord with one hand when winding it up.

USING THE VACUUM CLEANER WITH THE REMOTE CONTROL

■ Pull on the power plug to wind out the required length of the power cord and connect

it to apower socket.

■ To start the vacuum cleaner, press button A12 on the vacuum cleaner unit. After

turning on the vacuum cleaner, the display A13 will be lit.

■ Hold down both suction power setting buttons A9 on the vacuum cleaner unit until

the symbols on the display start turning on intermittently. Then press button B2 to

turn on the remote control on the handle. This will pair the remote control with the

vacuum cleaner and the vacuum cleaner can then be controlled using the remote

control in the handle.

■ Using buttons B3 and B4, set the required suction power depending on the intended

use of the vacuum cleaner – see table “Suction power table”.

■ When you have finished using it, turn off the vacuum cleaner by pressing the button

B2. Disconnect the power cord from the power socket. To wind the power cord back

into the vacuum cleaner, press button A8. It is recommended to hold the power cord

with one hand when winding it up.

Suction power table

Suction power Icon Suitable for

1 – lowest power Curtains and drapes

2 – medium-low power Upholstery and furniture

3 – medium power Rugs, mats and other loosely-placed

carpets

4 – medium-high power Large-area carpets

5 – highest power Smooth floor areas (wooden and floating

floors, vinyl, tiles, etc.)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 9300 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SVC 9300 Manual

Product: