759447
7
Zoom out
Zoom in
Previous page
1/10
Next page
Vacuum cleaner
SVC 730RD / SVC 730GR
EN
05/2019
Copyright © 2019, Fast ČR, a.s.
Warning:
Yellow marking on the supply cable tells you that the cable is close to its end. Do not pull
the cable more than to the red marking.
Adjusting the floor inlet nozzle 0 according to the floor surface.
You may set the inlet nozzle according to the floor surface by adjusting the inlet flap:
If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the
flap accordingly.
If you want to vacuum hard and smooth surface, move the bristles out of the nozzle, by turning
the flap accordingly.
Turning your vacuum cleaner on and off
To switch your machine on and off, press the START / STOP button 1 on the vacuum cleaner body.
Adjusting the suction strength 8
The suction strength may be adjusted by moving the rider on the appliance body (small range) or by the
moveable rider 6 on the hose handler.
Tip:
If the hose holder 7 on the hose 6 gets clogged during vacuuming, disconnect it from the
telescopic tube 9 and also disconnect the hose 6 from the vacuum cleaner body. Then place
the holder 7 inside the suction hole on the vacuum cleaner body and vacuum the stuck dirt
out.
Temporary interruption of the vacuuming process
If you want to stop the vacuuming process temporarily, place the telescopic tube 9 in the parking
position on the rear of your appliance, using the notch on the floor inlet nozzle 0
Warning:
Do not move the appliance from place to place if the hose is in the parking position! You
may break the parking position holder!
Using your accessories
The narrow slot nozzle may be used to vacuum in hard to reach spaces such as window
frames, libraries, upholstery corners, joints, etc.
Pillow nozzle may be used for bed vacuuming or upholstered furniture, etc.
Tip:
Use the narrow nozzle with brush to vacuum in hard to reach spaces that may be scratched
easily!
Ending the vacuuming process
At first, switch the vacuum cleaner off by pressing the START / STOP button 1 and then disconnect the
supply cable plug from the wall outlet.
Hold the cable with one hand during the winding process. With your other hand press and hold the
winding button 4. „Lead" the cable towards the winding mechanism to protect the vacuum cleaner
input area from damages.
Tip:
If the winding process stops and part of the supply cable is still outside, release the winding
button 4 and pull the cable out again by about 50 cm and press the winding button again
and repeat the winding process.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 730 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info