759469
6
Zoom out
Zoom in
Previous page
1/14
Next page
EN-6
EN
Vacuum Cleaner
SVC 7PE
Copyright © 2017, Fast ČR, a.s. Revision 01/2017
C
1 Carry handle
2 Front wheel mechanism
3 Stabilising travel wheel
4 Vertical parking position
5 Stabilising travel wheel
1
2
3
4
5
ASSEMBLY
Inserting the hose into the air suction hole on the vacuum cleaner:
Press both the safety buttons on the end of the hose end and insert the hose end into the air suction opening on
the vacuum cleaner until you hear a „click“. The hose is now secured in correct position.
Attach the holder to the telescopic tube:
Make sure to place the holder with the hose on the wider part of the telescopic tube.
Attach the floor inlet nozzle to the telescopic tube:
Make sure the floor nozzle is attached the narrower part of the telescopic tube.
Adjust the length of the telescopic tube:
Adjust the length of the telescopic tube as follows: Move and hold the button on the tube forward as shown by
the arrows and adjust the length of the tube as required. Release the button and move the tube slightly forward
until you hear a „click". The telescopic tube is now securely fixed in position.
USING YOUR VACUUM CLEANER
Connecting your vacuum cleaner to the electrical power grid
Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the cord is out
of the product. Insert the plug into the socket.
Caution:
Yellow marking on the power cord warns that the power cord is close to its end. Do not pull the cord
further than the red marking.
Adjusting the floor inlet nozzle according to the floor surface
You may set the inlet nozzle according to the floor surface by adjusting the inlet flap:
If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the flap
accordingly.
If you want to vacuum hard and smooth surfaces, move the bristles out of the nozzle, by turning the flap
accordingly.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 7 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info