759475
7
Zoom out
Zoom in
Previous page
1/12
Next page
Vacuum Cleaner
SVC 45BK / SVC 45BL / SVC 45GR / SVC 45RD / SVC 45WH
EN
EN-7
Copyright © 2014, Fast ČR, a.s. Revision 11/2014
Adjusting the fl oor inlet nozzle according to the fl oor surface.
You may set the inlet nozzle according to the fl oor surface by adjusting the inlet fl ap:
If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the
ap accordingly.
If you want to vacuum hard and smooth surfaces, move the bristles out of the nozzle, by turning
the fl ap accordingly.
Turning your vacuum cleaner on and off
To switch your machine on or off, press the START / STOP button on the vacuum cleaner body.
Adjusting the suction strength
Suction can be controlled by a sliding fl ap on the hose handle.
Tip:
If the hose holder becomes blocked when vacuuming, disconnect it from the tube and also
disconnect the hose from the vacuum cleaner body. Then place the holder inside the suction hole
on the vacuum cleaner body and vacuum the stuck dirt out.
Temporary interruption of the vacuuming process
If you wish to interrupt vacuuming for a short time, using the lug place the fl oor nozzle into the parking
position in its rear part.
Note:
Do not move the vacuum cleaner from place to place if the hose is in the parked position! You
may brake off the parking position holder!
Using your accessories
A space for the combination nozzle is located in the bottom part of the vacuum cleaner.
The combination nozzle may be used to vacuum in hard-to-reach spaces such as window frames,
libraries, upholstery corners, joints, etc.). By turning the brushes out you get a brush nozzle suitable for
vacuuming e.g. dust from smaller types of surfaces, grills, keyboards, etc.
C
Ending the vacuuming process
When you fi nish vacuuming, switch the vacuum cleaner off by pressing the START / STOP button and
then disconnect the power cord plug from the socket.
To wind the power cord back to the vacuum cleaner, press and hold the winding button with one hand.
Hold the cable with your other hand to protect the vacuum cleaner input area from damage.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 45 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info