759494

Sencor SVC 0740 Manual

6
Zoom out
Zoom in
Previous page
1/8
Next page
- 6 - 07/2019
2019
EN
2-in-1 Cordless vacuum
cleaner
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly,
even in cases, when one has already familiarised themselves with
previous use of similar types of appliances. Only use the appliance in
the manner described in this user’smanual. Keep this user'smanual in
asafe place where it can be easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty
card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS
ACCESSORIES
A1 On/Off button of the upright
vacuum cleaner
A2 Suction power adjustment
button of the upright vacuum
cleaner
A3 Button for releasing the hand
vacuum cleaner
A4 On/Off button of the hand
vacuum cleaner
A5 Dust container release button
A6 Floor nozzle
A7 Rechargeable battery
A8 Handle of the hand vacuum
cleaner
A9 Washable internal HEPA type
filter.
A10 Washable external filter
A11 Dust container
A12 Multi-purpose crevice nozzle
with an extensible brush
A13 Power adapter
A14 Floor nozzle rotary brush
A15 Wiping attachment
A16 Water tank lid
A17 Water / cleaning solution tank
A18 Water control button (CLOSE/
OPEN)
A19 Removable Velcro zip sleeve
BEFORE FIRST USE
■ Before first use, take the appliance and its accessories out of the
packaging material and remove all promotional labels and stickers.
Check that neither the appliance nor any of its parts is damaged.
ASSEMBLY
■ For reasons of safety during transport, the upright vacuum cleaner is
supplied disassembled.
■ Attach the handle of the upright vacuum cleaner to the body of the
vacuum cleaner so that the handle is aligned with the hole in the body
of the vacuum cleaner. Insert the supplied screw into the hole and
screw it in properly. Check than the handle is correctly attached and
not moving in any way.
■ Into the empty area in the body of the vacuum cleaner, insert the
assembled hand vacuum cleaner.
CHARGING THE VACUUM CLEANER
■ Insert the connector of the power adapter A13 into the socket located
at the rear part of the floor nozzle A6, and insert the plug of the power
adapter A13 into apower socket.
Note:
Prior to starting recharging, it is important for the vacuum
cleaner to be turned off and standing in the vertical parking
position. Do not turn on the vacuum cleaner when it is being
recharged and the power adapter A13 is connected to the
power socket.
■ When the adapter A13 is connected to apower socket, the vacuum
cleaner will switch to the charging mode. The indicator light on
the battery A7 will be lit and the LED diodes on the battery A7 will
gradually light up. Afull charge requires approximately 5hours. The
actual charging time depends on the power level of the battery.
■ Once the charging process is complete, all the diodes will be lit.
Disconnect the adapter A13 from the power socket and the connector
of the adapter A13 from the vacuum cleaner.
■ The LED diodes signal the battery power level. The individual
LEDdiodes will turn off as the battery gradually discharges. When the
battery is almost flat, the bottom LED diode will start flashing. When it
turns of completely, the battery is completely flat.
Note:
This vacuum cleaner contains aLi-ion battery. To ensure the
longest possible lifetime of the battery, we recommend:
- Do not unnecessarily leave the battery fully charged or
completely flat for too long.
- Do not keep the battery permanently fully charged. Its
lifetime will be extended by keeping it at approximately
half charge.
- Do not fully discharge the battery.
PARKING POSITION OF THE VACUUM CLEANER
■ Put the upright vacuum cleaner into the parking position by placing the
tip of your foot on top of the floor nozzle A6 and with asimple forward
movement of the handle secure the vacuum cleaner in the vertical
position. The latch located at the front on the elbow of the floor nozzle
A6 will slide into the groove on the top cover of the floor nozzle A6.
■ To release the upright vacuum cleaner from the parking position, place
the tip of your foot on top of the floor nozzle A6 and tilt the handle
backwards. The latch located at the front on the elbow of the floor nozzle
A6 will slide out of the groove on the top cover of the floor nozzle A6.
USING THE VACUUM CLEANER
■ Before cleaning it, always make sure that the vacuum cleaner is turned
off and disconnected from the power socket.
Upright vacuum cleaner
■ You may use the upright vacuum cleaner for vacuuming various types
of floor coverings such as for example hard floor coverings, carpets, etc.
■ Hold the vacuum cleaner by the handle and release it from the parking
position. After releasing it from the parking position, the handle may be
moved in the vertical direction.
■ Start the vacuum cleaner by pressing button A1. The vacuum cleaner
will start at full suction power. If you need to reduce the suction power,
press button A2. The suction power of the vacuum cleaner will be
reduced. Press button A2 again to again increase the suction power.
■ When you have finished using it, turn off the vacuum cleaner by
pressing button A1. Clean it according to the instructions contained in
chapter "Cleaning and maintenance", and allow it to charge according
to the instructions contained in chapter "Charging the vacuum
cleaner".
■ In the event that the rotary brush is clogged while vacuuming, e.g.
by a larger amount of vacuumed hair or fur, the automatic safety
mechanism is activated, which will stop the rotary brush to prevent it
from becoming damaged. Turn off the vacuum cleaner using button A1
and remove the wound on hair or fur from the rotary brush – more in
chapter "Cleaning and maintenance". Prior to turning on the vacuum
cleaner again, check that the rotary brush A14, the dust container A11
and the filters A9 andA10 are clean.
Hand vacuum cleaner
■ The hand vacuum cleaner is suitable for vacuuming locally soiled floor
coverings, furniture, etc.
■ In order to remove the hand vacuum cleaner from the body of the
upright vacuum cleaner, press button A3 and the top part of the hand
vacuum cleaner will be released. Hold the hand vacuum cleaner by the
handle A8 and carefully remove it from the body of the upright vacuum
cleaner.
■ Turn on the hand vacuum cleaner by pressing button A4.
■ For more comfortable vacuum cleaning, e.g. of furniture, put the multi-
purpose crevice nozzle A12 on to the hand vacuum cleaner. Use the
slider on the nozzle to control the extension and retraction of the brush.
■ When you have finished using it, turn off the vacuum cleaner using
button A4. Clean it according to the instructions contained in chapter
"Cleaning and maintenance", and insert it back into the body of
the upright vacuum cleaner. Allow it to recharge according to the
instructions in chapter "Charging the vacuum cleaner".
Using the wiping attachment
■ Attach the sleeve A19 to the bottom surface of the attachment A15.
■ Place the wiping attachment A15 with the attached sleeve A19 on the
floor. Remove the lid A16 and pour water or acleaning agent solution
into the tank A17. Put the lid A16 back on.
■ Place the vacuum cleaner on to the wiping attachment A15 so that
the tabs on the attachment A15 are aligned with the holes on the
underside of the floor nozzle A6. The travel wheels should fit into the
body of the attachment A15 – see fig B. Gently push on the vacuum
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 0740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 0740 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info