758939
5
Zoom out
Zoom in
Previous page
1/8
Next page
Toaster
STS 30WH / STS 31GR / STS 32BL / STS 33OR / STS 34RD / STS 35VT / STS 36YL / STS 37GG / STS 38RS
EN
EN-5
Copyright © 2014, Fast ČR, a.s. 11/2014
DESCRIPTION OF THE TOASTER
A
STOP
2
1
3
4
6
1
6
5
4
3
2
7
5
1 Toaster opening for inserting bread products
2 Control lever with the "High Lift" function for lifting smaller bread products
3 DEFROST button for toasting frozen bread products
4 REHEAT for repeated heating of a toast
5 Electronic toasting intensity dial
6 STOP button to immediately stop operation
7 Crumb tray (not shown, located in the bottom part of the toaster)
OPERATION OF THE TOASTER
1) Before use, take the appliance and its accessories out of the packaging material.
2) Connect the toaster to a power socket. Insert a slice of toast bread, slice of bread or half a roll, etc.
into the toasting slot. When selecting bread products for toasting check that its size is appropriate
for toasting in your toaster. The bread product must not project out of the toaster. Bread slices must
not be too thick so as not to become jammed in the toasting slots.
NOTE: Before first use the toaster must be started empty at least three times for the maximum
toasting time to remove any potential odours.
3) Set the toasting level in the range 1 to 6 (1 - lowest toasting level, 6 - highest toasting level). For fi rst
use we recommend that you set the middle toasting intensity. To toast another bread product you
can choose a different level depending on the type of bread and your taste.
4) Put the appliance into operation by pushing down the control lever.
Note: If the power cord is not connected to a socket the lever will not become secured in the lower
position and the appliance cannot be put into operation.
5) The toaster will turn itself off as soon as the set toast level is achieved and will automatically eject
the inserted bread product. The toasting process can be interrupted at any time by pressing the STOP
button. Take out the toasts from the toasting slots and if necessary toast another bread product.
Note: Control lever with the "High Lift" function makes it easier to take out smaller bread products.
Lift the lever about 2 cm above the initial position and take out the bread product.
6) Disconnect the toaster from the socket after use and allow it to cool down before further handling.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor STS 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STS 30 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info