Manual Sencor STM 7876 (page 11 of 11) (English)

758572

Zoom out

Zoom in

1/11

- 11 - 05/2020

7. Disassemble the assembled bowl and clean the individual parts after each use

according to the instructions in chapter Cleaning and maintenance.

ADVICE AND TIPS FOR BLENDING

■ First cut food with arm consistency such as fruit and vegetables into smaller

pieces measuring 3 cm and only then blend it.

■ First, blend a smaller amount of ingredients and then gradually add more

ingredients through the hole in the lid C2 while blending. In this way, you will

achieve better results than by adding all ingredients into the blending jar C4 at

once.

■ If you need to blend food of a solid consistency together with liquids, we

recommend that you rst blend the food of solid consistency and a part of the

liquids. Then gradually add the remaining liquids through the hole in the lid C2

while blending.

■ To blend very thick liquids, we recommend using the pulse level so that the blade

assembly C6 does not get jammed too often. Start the blender repeatedly in short

intervals.

■ Ice cubes must be processed immediately upon being removed from the freezer.

When the ice starts to melt, the ice cubes will stick together and it will not be

possible to blend them.

QUICK GUIDE TO PROCESSING INGREDIENTS

Ingredients Speed selection Recommended

blending time

Fruit, vegetables cut into smaller pieces 5–6 30s

Baby food 5–6 40 s

Spreads, dressings, marinades 3–4 30s

Smoothies and cocktails 6 to MAX 40 s

Soups 6 to MAX 30s

Ice cubes PULSE

Note:

The above food processing times are only areference. The actual blending

time depends on the size of the ingredients, their amount and the required

nal consistency.

CLEANING AND MAINTENANCE

■ Before cleaning the food processor, always switch it o by setting the speed

control knob A13 to the OFF position and disconnect it from the power socket.

■ Disassemble the food processor into its individual parts. Wait until moving parts

come to acomplete stop before disassembly.

■ Thoroughly wash the used removable parts after every use using warm water

with a neutral dishwashing detergent. Then rinse them under clean running

water and wipe them dry with ane wiping cloth or allow them to dry naturally.

After washing and drying, we recommend to coat the grinding blade B6 and the

grinding plates B8, B9 andB10 with cooking oil.

■ If you whisked egg whites, rst rinse the bowl A11 and the beater A4 or A6 under

cold water. If you were to use hot water, the egg white remains would harden and

their removal would be more dicult.

■ Clean the mixing container C4 by lling it with 0.5 litre of clean water and afew

drops of kitchen detergent and then assemble the blender and run it for 10 to

15 seconds. Then turn o the food processor, disconnect it from the power socket,

and after the rotating parts have come to astop, remove the blending jar assembly.

Empty out the contents of the blending jar C4 and then thoroughly rinse out the

blending jar C4 with clean water and wipe dry.

■ If more thorough cleaning is required, the cu C5 with blade assembly C6 may

be removed using a special wrench that can be ordered free of charge at an

authorised service centre. After cleaning, it is necessary to install the cu C5 with

blade assembly C6 back in its place and to properly tighten it using the wrench.

Attention:

When cleaning, be very careful not to injure yourself on the sharp

cutting edge.

■ The metal parts of the meat grinder, the blade assembly C6 and attachments A3–

A6 are not intended for washing in adishwasher. Other removable parts may be

washed in adishwasher.

■ For cleaning the base unit A12 and the multi-function head A8, use a cloth

lightly dipped in aweak detergent solution. Then wipe everything with aclean

dampened cloth and thoroughly wipe dry.

■ For cleaning, do not use solvents or cleaning agents with abrasive eects.

Otherwise, the surface of the appliance may be damaged.

■ Do not submerge the food processor or its power cord in water or any other liquids.

STORAGE

■ When not using the food processor, store it in a clean, dry place out of

children’sreach. Make sure that the multi-function head A8 is tilted down into the

horizontal position.

TECHNICAL SPECIFICATIONS

Rated voltage range ............................................................................................................ 220−240 V

Rated frequency........................................................................................................................50/60 Hz

Rated power input .....................................................................................................................1 000 W

Electrical shock protection class ........................................................................................................ II

Noise level ....................................................................................................................................85 dB(A)

The declared noise emission level of the appliance is 85 dB(A), which represents alevel

Aof acoustic power with respect to areference acoustic power of 1 pW.

Explanation of technical terminology

Safety class for electrical shock protection:

Class II – Electrical shock protection is provided by double or heavy-duty insulation.

INSTRUCTIONS AND INFORMATION REGARDING THE

DISPOSAL OF USED PACKAGING MATERIALS

Dispose of used packaging material at asite designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC

EQUIPMENT

This symbol on products or original documents means that used

electric or electronic products must not be added to ordinary

municipal waste. For proper disposal, renewal and recycling hand over

these appliances to determined collection points. Alternatively, in

some European Union states or other European countries you may

return your appliances to the local retailer when buying an equivalent

new appliance.

Correct disposal of this product helps save valuable natural resources

and prevents potential negative effects on the environment and

human health, which could result from improper waste disposal. Ask your local

authorities or collection facility for more details.

In accordance with national regulations penalties may be imposed for the incorrect

disposal of this type of waste.

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier

for the necessary information.

Disposal in other countries outside the European Union

This symbol is valid in the European Union. If you wish to dispose of this product,

request the necessary information about the correct disposal method from the local

council or from your retailer.

This product meets all the basic requirements of EU directives related to

it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 7876 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor STM 7876 Manual

Product: