Manual Sencor STM 7876 (page 8 of 11) (English)

758572

Zoom out

Zoom in

1/11

- 8 - 05/2020

EN Food Processor

User'smanual

■ Prior to using this appliance, please read the user’smanual thoroughly, even if you

already have experience in using similar appliances. Only use the appliance in the

manner described in this user’smanual. Keep this user’smanual in asafe place

where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Button for releasing the meat

grinder from the front attachment

hub

A2 Removable cover of the front meat

grinder attachment hub

A3 A-shaped beater

A4 Balloon whisk

A5 Kneading hook

A6 Elastic A-shaped beater

A7 Removable cover of the top blender

attachment hub

A8 Tilt-out multi-function head

A9 Attachment hub for attaching

attachments A3-A6

A10 Transparent bowl cover with ahole

for adding ingredients

A11 4.5-litre stainless steel bowl with

handle

A12 Base unit

A13 Speed control knob serves to

variably set the speed level

MIN-1-2-3-4-5-6-MAX, sets the pulse

level

(PULSE) and turns the appliance off

(OFF).

A14 Multi-function head release lock

A15 Minus „-” button for decreasing time

A16 Plus „+” button for increasing time

A17 Display

A18 Start/Pause button

A19 Anti-slip feet for stability of the

appliance during operation

A20 3-litre stainless steel bowl without

handles

A21 Lid serves to close the stainless steel

bowl A11 for short term storage of

processed ingredients.

DESCRIPTION OF MEAT GRINDER ACCESSORIES

B1 Pusher

B2 Stainless steel hopper

B3 Feed tube

B4 Grinding chamber

B5 Screw shaft

B6 Grinding blade

B7 Screw ring

B8 Fine grinding plate

B9 Medium fine grinding plate

B10 Coarse grinding plate

B11 Separator

B12 Sausage stuffer attachment

B13 Moulder

B14 Conical attachment

B15 Cookie maker

B16 Cookie maker holder

Note:

Parts B11–B14 are contained inside the pusher B1.

Certain models are only equipped with afine and coarse grinding disc B8

and B10.

DESCRIPTION OF THE BLENDER ACCESSORIES

C1 Inner cap of the blending jar

C2 Outer lid of the blending jar with

ahole for adding ingredients

C3 Handle

C4 1.5-litre Tritan blending jar with

titanium blades

C5 Cuff

C6 Blade assembly

BEFORE FIRST USE

1. Take the appliance and its accessories out of the packaging materials.

2. Thoroughly wash all accessory parts that are intended to come into contact with

food using warm water and aneutral kitchen detergent. Then rinse under clean

running water and thoroughly wipe dry with ane wiping cloth or allow them to

dry naturally. After washing and drying, we recommend to coat the grinding blade

B6 and the grinding plates B8–B10 with cooking oil.

3. Do not submerge the food processor or its power cord in water or any other liquids.

Attention:

The metal parts of the meat grinder and attachments A3–A6 are

not intended for washing in adishwasher. Other removable parts

may be washed in adishwasher.

BEATING, WHIPPING AND KNEADING

SELECTING ATTACHMENT TYPES

Attachment type Purpose of use

Beater A3 and A6

It is used for beating light and medium heavy yeast-free

doughs, for preparing sauces, creams, fillings, etc. Do not use it

for kneading heavy doughs.

Balloon whisk A4 It is used for whisking whole eggs or egg whites, whipped

cream, foamy creams, etc. Do not use it for beating or

kneading doughs.

Kneading hook A5 It is used for kneading various types of doughs including heavy

and thick doughs such as for example bread dough, pizza

dough, fresh pastry doughs, etc.

ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR

■ Before you start assembling or disassembling the food processor, check that it is

turned o and disconnected from the el. power socket.

1. Inserting the bowl and attaching the cover

1.1 Place the food processor on an even, dry and stable surface, for example on

akitchen countertop.

1.2 Use the lock A14 to release the multi-function head A8 and tilt it out all the way.

After tilting out the multi-function head release the lock A14. Locking of the multi-

function head inthe top open position is indicated by the lock returning to the

default position, which is accompanied by an audible click.

1.3 Insert the stainless steel bowl A11 into the base unit A12 and secure it in place by

turning it clockwise. When the bowl is properly attached, it cannot be separately

lifted out of the base unit.

1.4 On to the bottom part of the multi-function head A8 with attachment hub A9,

slide the cover A10 so that the latches along the perimeter of the round opening

in the cover A10 slide into the grooves along the perimeter of the attachment hub

A9.

1.5 The lid A21 is used for covering the bowl A11 for short term storage of processed

ingredients.

2. Mounting attachments

2.1 When attaching an attachment, the multi-function head A7 must be locked in

the open position, see point 1.2 in the previous chapter. To attachment hub A8,

attach one of the attachments A3–A5 in such a way that the attachment hub

shaft A8 slides into the attachment. Push the attachment towards the attachment

hub A8 and turn it anticlockwise to secure it in place. Lightly pull the attachment

downwards with one hand to check that it is properly attached.

2.2 Place the ingredients that you wish to process into the bowl A11. Release the lock

A14 and tilt the multi-function head A8 to ahorizontal position. After tilting down

the multi-function head A7, release the lock A13. The locked status of the multi-

function head in the tilted down work position is indicated by the lock returning to

the default position. This is accompanied by an audible click.

3. Disassembly

3.1 Use the lock A14 to release the multi-function head A8 and tilt it out all the way.

After tilting out the multi-function head, release the lock. Locking of the multi-

function head inthe top open position is indicated by the lock returning to the

default position, which is accompanied by an audible click.

3.2 Push the attachment towards the attachment hub A9 and turn it clockwise to

release it, and then remove it. Turn the bowl A11 anticlockwise and remove it from

the base unit A12. Remove the cover A10 by pulling it downwards. Move the multi-

function head A8 back to the horizontal position.

USING THE FOOD PROCESSOR

1. Select the right type of attachment based on its intended use and assemble

the appliance according to the instructions in the chapter Assembling and

disassembling the appliance. Place the ingredients into the bowl A11.

Attention:

In asingle batch, it is possible to precess no more than 2.2 litres

of light dough or 0.8 litres of thick, heavy dough. The maximum

number of egg whites that can be whisked at once is 12. We

recommend that you do not ll the bowl A11 past the level of

the 3l mark. If an insucient amount of ingredients are put in the

bowl A11 (less than 0.3 litres of dough), then they may not be

optimally processed.

2. Make sure that the multi-function head A8 is tilted down in the horizontal working

position and that the speed control knob A13 is set to the OFF position. Connect

the power cord to apower socket.

3. Set the required speed using the speed control knob A13. Gradually turn the

speed control knob A13 clockwise to increase the speed, turning it in the opposite

direction will reduce the speed. To initially stir in the ingredients, rst set alower

speed and then adjust it as required. Electronic speed regulation ensures that the

set speed will be maintained under various loads. While it is running, ingredients

may be added into the bowl A11 through the hole in the cover A10.

4. The pulse mode is used for increasing the speed to maximum for ashort time. To

activate the pulse mode, turn the speed control knob A13 to the PULSE position

and to ensure continuous operation hold it down in this position. As soon as you

release the speed control knob A13, it will automatically return to the OFF position.

5. If it is necessary to wipe ingredients o the inside of the mixing bowl A11 and

the attachment, rst turn o the food processor by setting the speed control knob

A13 to the OFF position and then disconnect it from the power socket. Wait until

the rotating parts come to astop and only then scrape away the ingredients with

aspatula.

6. After you have nished using the appliance, set the speed control knob A13 to the

OFF position and disconnect the power cord from the power socket.

7. Wait until the rotating parts come to a stop and disassemble the food mixer

according to the instructions included in chapter Assembling and disassembling

the appliance. Use asoft plastic spatula to empty out the contents of the bowl A11.

8. Clean out the food processor after each use according to the instructions in

chapter Cleaning and maintenance.

LED LIGHT

■ The multi-function head A8 has aLED light that turns on automatically when the

food processor is connected to apower socket. The LED light turns o automatically

after 2.5 minutes of inactivity, i.e. when the appliance is not running or when the

speed is not set during this time. The LED light turns on again automatically when

the food processor is put into operation by the control knob A13 being set to

a desired speed level. DISPLAY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 7876 in the language / languages: English as an attachment in your email.

The manual is 1,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor STM 7876 Manual

Product: