Manual Sencor STM 6353 (page 7 of 10) (English)

758536

Zoom out

Zoom in

1/10

05/2017

- 7 -

EN Food Processor

User'smanual

■ Prior to using this appliance, please read the user’s manual thoroughly, even if you

already have experience in using simi

lar appl

iances. Only use the appliance in the manner

described in this user’smanual. Keep this user’smanual in asafe place where it can be

easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase receipt

and responsibility statement of the vendor or warranty card for at least the duration of

the legal liability for unsatisfactory performance or quality. In the event of transportation,

we recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Button for releasing the meat grinder

from the front attachment hub

A2 Removable cover of the front meat

grinder attachment hub

A3 A-shaped beater

A4 Balloon whisk

A5 Kneading hook

A6 Removable cover of the top blender

attachment hub

A7 Tilt-out multi-function head

A8 Attachment hub for mounting

attachments A3–A5

A9 Bowl cover with ahole for adding

ingredients

A10 4.5-litre stainless steel bowl

A11 Base unit

A12 Speed control knob

Serves to gradually set the speed level

MIN-1-2-3-4-5-6-MAX, set the pulse

level (PULSE) and to turning off the

appliance (OFF).

A13 Multi-function head release lock

A14 Anti-slip feet for stability of the

appliance during operation

A15 Lid

serves to close the stainless steel

bowl A10 for short term storage of

processed ingredients.

DESCRIPTION OF MEAT GRINDER ACCESSORIES

B1 Pusher

B2 Stainless steel hopper

B3 Feed tube

B4 Grinding chamber

B5 Screw shaft

B6 Grinding blade

B7 Screw ring

B8 Fine grinding plate

B9 Medium fine grinding plate

B10 Coarse grinding plate

B11 Separator

B12 Sausage stuffer attachment

B13 Moulder

B14 Conical attachment

B15 Cookie maker

B16 Cookie maker holder

Note:

Parts B11–B14 are contained inside the pusher B1.

Certain models are only equipped with ane and coarse grinding disc B8 and

B10.

DESCRIPTION OF THE BLENDER ACCESSORIES

C1 Inner cap of the blending jar

C2 Outer lid of the blending jar with

ahole for adding ingredients

C3 Handle

C4 Glass blending jar with 1.5l capacity

C5 Cu

C6 Blade assembly

BEFORE FIRST USE

1. Take the appliance and its accessories out of the packaging materials.

2. Thoroughly wash all accessory parts that are intended to come into contact with food

using warm water and aneutral kitchen detergent. Then rinse under clean running water

and thoroughly wipe dry with ane wiping cloth or allow them to dry naturally. After

washing and drying, we recommend to coat the grinding blade B6 and the grinding

plates B8–B10 with cooking oil.

3. Do not submerge the food processor or its power cord in water or any other liquids.

Attention:

The metal parts of the meat grinder and attachments A3–A5 are not

intended for

washing in adishwasher. Other removable parts may be washed in adishwasher.

BEATING, WHIPPING AND KNEADING

SELECTING ATTACHMENT TYPES

Attachment type Purpose of use

Beater A3 It is used for beating light and medium heavy yeast-free doughs, for

preparing sauces, creams, llings, etc. Do not use it for kneading

heavy doughs.

Balloon whisk A4 It is used for whisking whole eggs or egg whites, whipped cream,

foamy creams, etc.

Do not use it for beating or kneading doughs.

Kneading hook A5 It is used for kneading various types of doughs including heavy and

thick doughs such as for example bread dough, pizza dough, fresh

pastry doughs, etc.

ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR

■ Before you start assembling or disassembling the food processor, check that it is turned

o and disconnected from the el. power socket.

1. Inserting the bowl and attaching the cover

1.1 Place the food processor on an even, dry and stable surface, for example on akitchen

countertop.

1.2 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After

tilting out the multi-function head A7 release the lock A13. Locking of the multi-function

head A7 inthe top open position is indicated by the lock A13 returning to the default

position, which is accompanied by an audible click.

1.3 Insert the stainless steel bowl A10 into the base unit A11 and secure it in place by turning

it clockwise. When the bowl A10 is properly attached, it cannot be separately lifted out of

the base unit A11.

1.4 On to the bottom part of the multi-function head A7 with attachment hub A8, slide the

cover A9 so that the latches along the perimeter of the round opening in the cover A9

slide into the grooves along the perimeter of the attachment hub A8.

1.5 The lid A15 is used for covering the bowl A10 for short term storage of processed

ingredients.

2. Mounting attachments

2.1 When attaching an attachment, the multi-function head A7 must be locked in the

open position, see point 1.2 in the previous chapter. To attachment hub A8, attach

one of the attachments A3–A5 in such away that the attachment hub shaft A8 slides

into the attachment. Push the attachment towards the attachment hub A8 and turn it

anticlockwise to secure it in place. Lightly pull the attachment downwards with one hand

to check that it is properly attached.

2.2 Place the ingredients that you wish to process into the bowl A10. Release the lock A13

and tilt the multi-function head A7 to ahorizontal position. After tilting down the multi-

function head A7, release the lock A13. The locked status of the multi-function head A7

in the tilted down work position is indicated by the lock A13 returning to the default

position. This is accompanied by an audible click.

3. Disassembly

3.1 Use the lock A13 to release the multi-function head A7 and tilt it out all the way. After

tilting out the multi-function head A7, release the lock A13. Locking of the multi-

function head A7 inthe top open position is indicated by the lock A13 returning to the

default position, which is accompanied by an audible click.

3.2 Push the attachment towards the attachment hubA8 andturn it clockwise to release it,

and then remove it. Turn the bowl A10 anticlockwise and remove it from the base unit

A11. Remove the cover A9 by pulling it downwards. Move the multi-function head A7

back to the horizontal position.

USING THE FOOD PROCESSOR

1. Select the right type of attachment based on its intended use and assemble the

appliance according to the instructions in the chapter Assembling and disassembling

the appliance. Place the ingredients into the bowl A10.

Attention:

In asingle batch, it is possible to precess no more than 2.2 litres of light dough or

0.8 litres of thick, heavy dough. The maximum number of egg whites that can be

whisked at once is 12. We recommend that you do not ll the bowl A10 past the

level of the 3l mark. If an insucient amount of ingredients are put in the bowl

A10 (less than 0.3 litres of dough), then they may not be optimally processed.

2. Make sure that the multi-function head A7 is tilted down in the horizontal working

position and that the speed control knob A12 is set to the OFF position. Connect the

power cord to apower socket.

3. Set the required speed using the speed control knob A12. Gradually turn the speed

control knob A12 clockwise to increase the speed, turning it in the opposite direction will

reduce the speed. To initially stir in the ingredients, rst set alower speed and then adjust

it as required. Electronic speed regulation ensures that the set speed will be maintained

under various loads. While it is running, ingredients may be added into the bowl A10

through the hole in the cover A9.

4. The pulse mode is used for increasing the speed to maximum for ashort time. To activate

the pulse mode, turn the speed control knob A12 to the PULSE position and to ensure

continuous operation hold it down in this position. As soon as you release the speed

control knob A12, it will automatically return to the OFF position.

5. If it is necessary to wipe ingredients o the inside of the mixing bowl A10 and the

attachment, rst turn o the food processor by setting the speed control knob A12 to

the OFF position and then disconnect it from the power socket. Wait until the rotating

parts come to astop and only then scrape away the ingredients with aspatula.

6. After you have nished using the appliance, set the speed control knob A12 to the OFF

position and disconnect the power cord from the power socket.

7. Wait until the rotating parts come to astop and disassemble the food mixer according

to the instructions included in chapter Assembling and disassembling the appliance. Use

asoft plastic spatula to empty out the contents of the bowl A10.

8. Clean out the food processor after each use according to the instructions in chapter

Cleaning and maintenance.

LED LIGHT

■ The multi-function head A7 has a LED light that turns on automatically when the food

processor is connected to a power socket. The LED light turns o automatically after

2.5 minutes of inactivity, i.e. when the appliance is not running or when the speed is not

set during this time. The LED light turns on again automatically when the food processor

is put into operation by the control knob A12 being set to a desired speed level.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 6353 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor STM 6353

Sencor STM 6353 User Manual - Dutch - 9 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor STM 6353 Manual

Product: