Manual Sencor STM 6352 (page 3 of 10) (English)

758535

Zoom out

Zoom in

1/10

05/2017

- 3 -

■ In the event that an item, such as aspoon, falls into the bowl during operation,

immediately set the speed control knob to the OFF position (stand-by mode), and

disconnect the power cord from the power socket. Wait until the rotating parts

come to astop and then remove the item.

■ If ingredients stick to the attachment or the sides of the bowl, turn the appliance

o, disconnect it from the power socket, and wait until the rotating parts come to

astop. Use asilicone spatula to clean the attachment and the inside of the bowl.

Then you can restart the appliance.

■ Make sure that no hair, clothing or other items enter the feed tube of meat grinder

while it is running. Do not put anything other than the ingredients that are to be

processed into the feed tube.

■ Never use your ngers or other items to push ingredients through the meat grinder

feed tube. For this purpose there is apusher included as an accessory.

Warning:

Incorrect use may lead to injuries.

■ To prevent injury caused by sharp edges, be especially careful when handling

the grinding blade of the meat grinder and the blade assembly of the blender.

Increased attention must also be paid when emptying out the blending jar, when

removing the blade assembly from the blending jar, when removing the grinding

blade from the chamber, and when cleaning the appliance.

■ Do not attempt to grind bones, nut shells or other hard ingredients.

■ Hot liquids up to atemperature of 80 °C may be processed in the blending

jar. Be especially careful when handling hot liquids. Hot steam or splashing hot

foods and liquids may cause scalding. Never start the blender without the lid

properly seated in position. When processing hot liquids, do not remove the inner

cap during operation. Do not touch the hot surface. Use the handle to carry the

blending jar when it is hot.

■ The maximum continuous operating time is 10 minutes. Do not exceed the

maximum operating time of 5 minutes when in the kneading mode and do not

exceed the maximum operating time of 2 minutes when using the blender. Before

starting it again, allow the appliance to cool down for 30 minutes.

■ Always turn o the appliance, disconnect it from the power socket when

not be using it, when leaving it without supervision, and before assembling,

disassembling, cleaning or moving it. Prior to disassembling the appliance and

replacing accessories or accessible parts that move during use, wait until all

moving parts come to astop.

■ Clean it according to the instructions in chapter Cleaning and maintenance.

■ Never wash the appliance under running water or submerge it in water or another

liquid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 6352 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor STM 6352

Sencor STM 6352 User Manual - Dutch - 9 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor STM 6352 Manual

Product: