758523

Sencor STM 48 Manual

8
Zoom out
Zoom in
Previous page
1/22
Next page
EN-8
EN
Food Processor
STM 40WH / STM 41GR / STM 42BL / STM 43OR
STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS
2014
11/2014
BLENDING, WHIPPING AND KNEADING
PLANETARY MIXING SYSTEM
• The planetary mixing system is based on the principle of dual rotation of the attachment. The
attachment rotates anticlockwise along the inner perimeter of the bowl while rotating around
its own axis in the opposite direction. This ensures that ingredients are processed thoroughly and
evenly.
SELECTING ATTACHMENT TYPES
ATTACHMENT TYPE APPLICATION
Kneading hook A1It is used for kneading and preparing heavy and thick doughs containing
yeast, e.g. bread dough.
Beater A3It is used for mixing medium heavy and lighter doughs not containing yeast,
for mixing sauces, creams, fi llings, etc.
Whisk A2It is used for whisking whole eggs or egg whites, whipped cream, light
doughs, foamy creams, etc. Do not use it for mixing heavy and thick doughs.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
• Before you start assembling or disassembling the food processor, check that it is turned off and
disconnected from the el. power socket.
1. Inserting the mixing bowl
1.1 Place the food processor on an even, dry surface, for example on a kitchen countertop.
1.2 Slide button A0 upwards and hold it there. Tilt out the arm A8. To lock the arm A8 in the open
position, release button A0.
1.3 Place the stainless steel bowl A4 into the hole in the base unit A5 and secure it in place by turning
it clockwise. When the bowl A4 is properly attached, it is not possible to lift it off the base unit
A5.
2. Attaching an attachment (kneading hook, beater or whisk)
2.1 When attaching an attachment, the arm A8 must be secured in the open position, see point 1.2
in chapter Inserting the mixing bowl. Attach one of the attachments on to the shaft of the mixing
head A9 so that the shaft A9 fi ts into the hole on the attachment. Push the attachment towards
the mixing head A8 and turn it anticlockwise to secure it to the shaft A9.
2.2 With one hand, hold the attachment and gently pull it downwards. If it is properly secured to the
shaft A9, it will not come off.
2.3 If you will not be immediately placing ingredients into the mixing bowl A4, slide the button A0
upwards, hold it down and tilt the arm A8 to the horizontal position. After tilting the arm A8 to
the horizontal position, release the button A0.
3. Removing the attachments and mixing bowl
3.1 Slide button A0 upwards and hold it there. Tilt out the arm A8. To lock the arm A8 in the open
position, release button A0.
3.2 Hold the attachment and gently push it against the mixing head A8. Then rotate it clockwise until
it is released from the shaft A9 and take it off. Turn the mixing bowl A4 anticlockwise and take
it off the base unit A5. Move the arm A8 back to the horizontal position.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor STM 48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 48 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info