758519
4
Zoom out
Zoom in
Previous page
1/22
Next page
EN-4
EN
Food Processor
STM 40WH / STM 41GR / STM 42BL / STM 43OR
STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS
2014
11/2014
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE FOR FUTURE USE.
Before connecting this appliance to a power socket, make sure the voltage stated on the
product's rating label corresponds to the voltage in your power socket.
Never use accessories, which have not been supplied with this appliance or which have not been
explicitly recommended by the manufacturer.
The appliance is intended and designed for processing a standard amount of food in the household.
Do not use the appliance for anything other than its intended purpose.
Do not use the appliance in an industrial environment or outdoors.
Do not place the appliance on window sills or on unstable surfaces. Only place the appliance on an
even, dry and stable surface.
Do not place the appliance on an electric or gas stove, in the vicinity of an open fl ame or appliances
that are sources of heat.
Ensure that the power plug contacts do not come into contact with water or moisture.
Never use multiple attachments simultaneously.
Do not wash the appliance (except for the removable parts) under running water and do not
submerge it in water or any other liquid.
Always turn off the appliance, disconnect it from the power socket if you will not be using it, if you
will be leaving it without supervision, and before assembling, disassembling, cleaning or moving it.
Prior to disassembling the appliance and replacing accessories or accessible parts that move during
use, wait until all moving parts come to a stop.
For safety reasons, this appliance is equipped with a safety mechanism that prevents the motor
from being started if the appliance's arm is tilted out.
Before putting the appliance into operation, check that it is correctly assembled and that the arm
is in the horizontal position.
Allow hot liquids or food to cool down before mixing them.
Do not attempt to grind bones, nut shells or other hard ingredients.
Do not leave the appliance in continuous operation under a heavy load for a period longer than
10 minutes. Before turning it on again, allow it to cool down for at least 30 minutes.
Do not tilt out the arm or put your hands or items, such as a kitchen knife, fork or wooden spoon,
into the bowl while the appliance is running. Do not touch rotating parts of the appliance or
attachments and ensure that foreign items such as clothing, hair, etc. are kept away. An injury could
occur or the appliance could be damaged.
If an item, such as a spoon, falls into the mixing bowl while the appliance is running, immediately
set the speed control knob to the OFF position (stand-by mode), disconnect the power cord from
the power socket and take the item out of the bowl.
If ingredients stick to the attachments or the inside of the bowl, turn off the appliance and
disconnect it from the power socket. Use a spatula to clean the attachments and the inside of the
bowl. Then you can continue mixing.
Never use your fi ngers or other items to push ingredients through the feed tube of the meat
grinder or the slicing and grating attachment. For this purpose there is a pusher included as an
accessory to this appliance.
The appliance must not run without a load. The incorrect use of the appliance may negatively
affect its lifetime.
Before storing the appliance, check that the stand arm is tilted to the horizontal position.
Do not place heavy items on the power cord. Make sure the power cord does not hang over the
edge of a table or that it does not touch a hot surface.
Do not disconnect the appliance from the power socket by pulling on the power cord. This could
damage the power cord or the power socket. Disconnect the cord from the power socket by gently
pulling the plug of the power cord.
If the power cord is damaged, have it replaced at a specialised service centre. It is forbidden to use
the appliance if it has a damaged power cord or plug.
To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any
adjustments to it. Have all repairs or adjustments of the appliance performed at an authorised
service centre. By tampering with the appliance you risk voiding your legal rights arising from
unsatisfactory performance or quality warranty.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor STM 44 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 44 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info