758515

Sencor STM 40 Manual

11
Zoom out
Zoom in
Previous page
1/22
Next page
Food Processor
STM 40WH / STM 41GR / STM 42BL / STM 43OR
STM 44RD / STM 45VT / STM 46YL / STM 47GG / STM 48RS
EN
EN-11
2014
11/2014
5. To disassemble the meat grinder, fi rst remove the hopper B2. Then press the button A6 (fi g. E)
and remove the meat grinder by turning it clockwise. When disassembling the meat grinder into its
individual parts, proceed in the reverse sequence.
E
USING THE MEAT GRINDER
1. First prepare the meat for grinding in the following way. Remove all bones, tendons, cartilage and
cut the meat into 2x2x6 cm size pieces that will freely pass through the feed tube B3.
Attention:
Do not process frozen meat. Allow it to defrost before grinding it.
2. Make sure that the meat grinder is correctly assembled and that the speed control knob Aqa is set
to the OFF position.
3. Place the stainless steel bowl A4 or another suitable container under the meat grinder. Insert the
power plug into an electrical power socket.
4. Use the speed control knob Aqa to set the desired speed. We recommend that you initially set it to
5 and then lower or increase the speed as required. Gradually place the meat pieces into the feed
tube B3 and push them in using the pusher B1. Take care not to clog up the feed tube B3 by
a large amount of meat.
Attention:
Do not use fi ngers or other utensils to push the meat through the feed tube B3. Always use the
pusher B1 designed for this purpose.
5. The ground meat will fall into the prepared bowl. The meat that remains in the grinding chamber
B4 can be removed by grinding a slice of bread or a bread roll.
6. To turn off the appliance, set the speed control knob Aqa to the OFF position.
7. Clean out the meat grinder after each use according to the instructions in chapter Cleaning and
maintenance.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor STM 40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 40 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info