Manual Sencor STM 3776 (page 7 of 9) (English)

758530

Zoom out

Zoom in

1/9

04/2017

- 7 -

EN Food Processor

User'smanual

■ Prior to using this appliance, please read the user’s manual thoroughly, even

in cases, when one has already familiarised themselves with previous use of

similar types of appliances. Only use the appliance in the manner described in

this user’smanual. Keep this user’smanual in asafe place where it can be easily

retrieved for future use.

■ We recommend saving the original cardboard box, packaging material,

purchase receipt and responsibility statement of the vendor or warranty card

for at least the duration of the legal liability for unsatisfactory performance

or quality. In the event of transportation, we recommend that you pack the

appliance in the original box from the manufacturer.

DESCRIPTION OF THE FOOD PROCESSOR

A1 Kneading hook

A2 Balloon whisk

A3 A-shaped beater

A4 5.5-litre stainless steel bowl

A5 Base unit

A6 Removable cover of the front meat

grinder attachment hub

A7 Removable cover of the top

blender attachment hub

A8 Tilt-out multi-function head

A9 Bowl cover with ahole for adding

ingredients

A10 Hub for attaching attachments

A1–A3

A11 Multi-function head release lock

A12 Speed control knob

serves to set speeds 1 to 10, sets

the pulse level and turns off the

appliance.

A13 Suction cups

provide stability to the appliance

during operation.

DESCRIPTION OF MEAT GRINDER ACCESSORIES

B1 Pusher

B2 Hopper

B3 Feed tube

B4 Grinding chamber

B5 Screw shaft

B6 Grinding blade

B7 Screw ring

B8 Fine grinding plate

B9 Coarse grinding plate

B10 Separator

B11 Thin sausage stuffer attachment

B12 Thick sausage stuffer attachment

DESCRIPTION OF THE BLENDER ACCESSORIES

C1 Inner cap of the blending jar

C2 Outer lid of the blending jar with

ahole for adding ingredients

C3 Glass blending jar with 1.5 l

capacity

C4 Handle

C5 Blade assembly

is an integral part of the blending

jar.

BEFORE FIRST USE

1. Take the appliance and its accessories out of the packaging materials.

2. Thoroughly wash all accessory parts that are intended to come into contact

with food using warm water and aneutral kitchen detergent. Then rinse them

under clean running water and thoroughly wipe dry with afine wiping cloth or

allow them to dry naturally. After washing and drying, we recommend to coat

the grinding blade B6 and the grinding plates B8 andB9 with cooking oil.

3. Do not submerge the food processor or its power cord in water or any other

liquids.

Attention:

The metal parts of the meat grinder and attachments A1–A3 are not

intended for washing in a dishwasher. Other removable parts may be

washed in adishwasher.

BEATING, WHIPPING AND KNEADING

SELECTING ATTACHMENT TYPES

Attachment type Purpose of use

Beater A3 It is used for beating light and medium heavy yeast-free

doughs, for preparing sauces, creams, fillings, etc. Do not

use it for kneading heavy doughs.

Balloon whisk A2 It is used for whisking whole eggs or egg whites, whipped

cream, foamy creams, etc. Do not use it for beating or

kneading doughs.

Kneading hook A1 It is used for kneading various types of doughs including

heavy and thick doughs such as for example bread dough,

pizza dough, fresh pastry doughs, etc.

ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR

■ Before you start assembling or disassembling the food processor, check that it

is turned off and disconnected from the power socket.

1. Inserting the bowl

1.1 Place the food processor on an even, dry surface, for example on akitchen

countertop.

1.2 Use the lock A11 to release the multi-function head A8 and tilt it out all the

way. The locked status of the multi-function head A8 in the open position is

indicated by the lock A11 returning to the default position.

1.3 Insert the stainless steel bowl A4 into the base unit A5 and secure it in place

by turning it clockwise. When the bowl A4 is properly attached, it cannot be

separately lifted out of the base unit A5.

2. Mounting attachments and the cover

2.1 When attaching an attachment, the multi-function head A8 must be locked

in the open position, see point 1.2 in the previous chapter. Attach one of the

attachments on to the shaft on the underside of the multi-function head A8

so that the shaft fits into the hole on the attachment. Push the attachment

towards the multi-function head A8 and turn it anticlockwise to secure it in

place. Lightly pull the attachment downwards with one hand to check that it is

properly attached.

2.2 Place the ingredients that you wish to process into the bowl A4. Release the lock

A11 and tilt the multi-function head A8 to the horizontal position. After tilting

down the multi-function head A8, release the lock A11. The locked status of the

multi-function head A8 in the tilted down work position is indicated by the lock

A11 returning to the default position. This is accompanied by an audible click.

2.3 Place the cover A9 on to the bowl A4.

3. Disassembly

3.1 Remove the cover A9. Release the lock A11 and tilt out the multi-function head

A8 all the way. After tilting out the multi-function head A8, release the lock A11.

Locking of the multi-function head A8 inthe open open position is indicated

by the lock A11 returning to the default position, which is accompanied by an

audible click.

3.2 Push the attachment gently towards the multi-function head 8. Then rotate it

clockwise until it is released from the shaft and take it off. Turn the bowl A4

anticlockwise and remove it from the base unit A5. Move the arm A8 back to

the horizontal position.

USING THE FOOD PROCESSOR

1. Select the right type of attachment based on its intended use and assemble

the appliance according to the instructions in the chapter Assembling and

disassembling the food processor. Put the ingredients into the bowl A4 before

tilting the multi-function head A8 to the horizontal position.

Attention:

In asingle batch, it is possible to process no more than 2.2 litres of light

dough or 0.8 litres of thick, heavy dough. The maximum number of egg

whites that can be whisked at once is 12.

If an insufficient amount of ingredients are put in the bowl A4 (less than

0.3 litres of dough), then they may not be perfectly processed.

2. Make sure that the speed control knob A12 is set to position 0 (off) and that the

multi-function head A8 is tilted down in the horizontal position. The cover A7

must be properly attached to the multi-function head A8. Otherwise, the food

processor will not start. Connect the power cord to apower socket.

3. Set the required speed using the speed control knob A12. Gradually turn the

speed control knob A12 clockwise to increase the speed, turning it in the

opposite direction will reduce the speed. To initially stir in the ingredients, first

set alower speed and then adjust it as required. Electronic speed regulation

ensures that the set speed will be maintained under various loads. While it is

running, ingredients may be added into the bowl A4 through the hole in the

cover A9.

4. The pulse mode is used for increasing the speed to maximum for ashort time.

To activate the pulse mode, turn the speed control knob A12 to the ”P” position

and to ensure continuous operation hold it down in this position. As soon as

you release the speed control knob A12, it will automatically return to position

0 (off).

5. If it is necessary to wipe ingredients off the inside of the mixing bowl A4 and

the attachment, first turn off the food processor by setting the speed control

knob A12 to position 0 (off) and then disconnect it from the power socket.

Wait until the rotating parts come to a stop and only then scrape away the

ingredients with aspatula.

6. After you have finished using the appliance, set the speed control knob A12 to

position 0 (off) and disconnect the power cord from the power socket.

7. Wait until the rotating parts come to a stop and disassemble the food

processor according to the instructions included in chapter Assembling and

disassembling the food processor. Use asoft plastic spatula to empty out the

contents of the bowl A4.

8. Clean out the food processor after each use according to the instructions in

chapter Cleaning and maintenance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor STM 3776 in the language / languages: English as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor STM 3776

Sencor STM 3776 User Manual - Dutch - 9 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor STM 3776 Manual

Product: