758908
4
Zoom out
Zoom in
Previous page
1/12
Next page
EN-4
EN
Sandwich Maker with Removable Plates
SSM 9300
2011 10/2011
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND STORE THESE INSTRUCTIONS FOR FUTURE USE.
Before connecting the appliance to a power socket check that the technical details on the appliance
label match the electrical voltage in the socket.
Only plug the appliance into a correctly grounded socket.
This appliance is designed for use indoors. Do not use this appliance for commercial purposes.
Do not use the appliance in industrial surroundings or outdoors!
Do not use the appliance for any other than its intended purpose.
Do not place the appliance on or near an electric or gas stove or other sources of heat.
Do not place the appliance at the edge of a utility surface or on an unstable surface. The appliance
must be located on a stable and even surface.
This appliance is supplied with three pairs of removable baking plates. Only use the same pair of
baking plates at any one time. Ensure that the baking plates are properly inserted in the appliance
before turning it on.
After connecting the appliance into an electric power supply the baking surface and the outer
surface of the appliance begins to heat up. Do not touch the hot surface. To close and open the top
baking plate use the thermally insulated handle and for removing the fi nished meal use a wooden
or heat resistant plastic spatula.
Allow adequate air circulation around the appliance when in use. Do not place any objects on the
heated surface of the appliance.
Food may catch on fi re during the cooking process, therefore check the sandwich maker regularly.
If you notice smoke, disconnect the power plug from the socket and extinguish the fi re.
Always turn off the appliance and disconnect it from the power socket if you leave it without
supervision or if you will not be using it and before changing the baking plates or cleaning it.
Allow the appliance to fully cool down before changing the baking plates, moving, cleaning or
storing it.
Clean the grilling surfaces after each use, see the chapter Cleaning and maintenance.
To avoid any injury by electrical shock, do not clean the appliance under running water and do not
submerge in water or any liquid.
Ensure that the power cord does not come into contact with water or moisture or heated surface.
Do not disconnect the appliance from the power socket by pulling on the power cord. This could
damage the power cord or the power socket. Disconnect the cord from the power socket by gently
pulling out the plug of the power cord.
If the power cord is damaged, have it replaced at a technical service centre. It is forbidden to use
the appliance if it has a damaged power cord or plug.
To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any
adjustments to it. Have all repairs or adjustments of the appliance performed at an authorised
service centre. Tampering with the appliance during the warranty period may void the warranty
policy.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSM 9300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSM 9300 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info