759886

Sencor SSI 5421 Manual

8
Zoom out
Zoom in
Previous page
1/10
Next page
EN-8
EN
Steam Iron
SSI 5420RD / SSI 5421TQ
2015 06/2015
6. TURNING OFF
• When you have finished using it, set the continuous steam control lever A5 to the position marked
with the symbol and turn the temperature dial A9 to the MIN position. Disconnect the power
cord from the power socket and allow the soleplate Aqs to cool down. When the soleplate Aqs has
cooled down, pour out the water from the water tank Aqa into a sink.
TIPS FOR QUALITY IRONING
• Do not fill the washing machine drum with too much laundry, otherwise it will be overly crumpled
up. You can also avoid overly crumpled laundry by setting a lower spin drying speed.
• If you are ironing fabrics from blended materials (e.g. 40% wool and 60% synthetic material), set
the temperature dial according to the material which is ironed at a lower temperature.
• If you do not know the composition of the fabric, identify the suitable temperature dial setting
by ironing a piece of the fabric from the underside. Start by setting the temperature dial at a low
temperature and gradually increase it until the ideal temperatures is achieved.
• Never iron over places that have sweat marks or other stains. The high temperature fixes the stain,
making it difficult to remove.
• To avoid silk, wool and synthetic fabrics from being shiny after ironing, iron them from the underside.
• Some materials are easier to iron when they are lightly damp.
• Spray fine fabrics with the spray before ironing them or iron them under a lightly damp wiping cloth.
MAINTENANCE AND CLEANING
Cleaning the exterior parts of the iron
• Before cleaning, make sure that the continuous steam control lever A5 is set to position , the
temperature dial A9 is turned to the MIN position and the power cord is disconnected from the
power socket. Allow the soleplate Aqs to cool down. Flip open the cap A6 and then empty out the
water tank Aqa into a sink. Close the cap A6 again.
• Wipe the soleplate Aqs and the outer surface of the iron with a lightly dampened cloth. Then wipe
everything dry.
• Do not use metal items, petrol, solvents or abrasive cleaning products, etc. for cleaning to avoid
damaging the surface. Do not submerge the iron in water.
Removing limescale deposits
• For the removal of limescale deposits from the inner part of the soleplate Aqs, the iron is equipped
with a Self-Clean function. Use the Self-Clean function regularly at least once every 14 days.
• Make sure that the continuous steam control lever A5 is set to position and that the iron
is disconnected from the power socket. Fill the tank Aqa with water up to approximately half
its capacity. Do not add vinegar or other limescale removers into the water. Connect the iron to
a power socket. Set the temperature dial A9 to maximum and wait until the indicator light A2
turns off. Disconnect the iron from the el. power socket and hold it in a horizontal position above
the sink. Press the Self-Clean button A0 and hold it down. Steam and hot water will start to be
emitted from the soleplate Aqs. At the same time also limescale deposits from the inner parts of
the soleplate Aqs will be removed. Gently move the iron from side to side until the water tank
Aqa is completely empty. After emptying it out, release the button A0. If the soleplate Aqs is very
soiled, you can repeat this process once more.
• After completing the Self-Clean process, reconnect the iron to the power socket and allow it to heat
up to maximum temperature in order to dry out the soleplate Aqs. Iron over a piece of unneeded
fabric to remove water stains that formed on the soleplate Aqs during the cleaning process. Then
set the temperature dial A9 to the MIN position, disconnect the iron from the power socket and
allow it to cool down. Finally, wipe the soleplate Aqs using a clean cloth.
… 8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSI 5421 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSI 5421 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info