758411
8
Zoom out
Zoom in
Previous page
1/12
Next page
EN-8
EN
Electric Slicer & Grater
SSG 3500WH / SSG 3501GR / SSG 3502BL / SSG 3503OR / SSG 3504RD
SSG 3505VT / SSG 3506YL / SSG 3507TQ / SSG 3508RS
2015
01/2015
The table includes the most common types of food that can be processed using this appliance.
However, you can also use it for other types of food, for which it generally applies that it can be
cut using a kitchen knife.
Attention:
Do not use the appliance for mincing meat, for processing nut shells or hard fruit stones contained,
for example, in mangoes or avocados, frozen or other very hard foods such as coffee beans,
nutmeg, etc.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
Before you start assembling or disassembling the appliance, check that it is turned off and
disconnected from the el. power socket.
Place the motor unit A7 on an even dry and stable surface. Place the chamber A3 with the feed
tube A2 slightly tilted to the right against the hole in the motor unit A7 (see fig. B1) and turn
it anticlockwise all the way so that the feed tube A2 is in a vertical position perpendicular to the
level at which the motor unit is located (see fig. B2)
B
12
Select one of the attachments A9qd and insert it into the chamber A3, so that the shaft inside the
chamber A3 slides into the pentagonal hole in the centre of the attachment. Place the fastening
pin A4 against the shaft and turn it anticlockwise all the way to secure the attachment in position.
Disassemble the appliance in the reverse sequence.
OPERATING THE APPLIANCE
1. Prepare the food and cut it into pieces that will pass through the feed tube A2. Kernels and stones
may need to be removed from certain types of fruit and vegetables.
2. Make sure that the appliance is correctly assembled and located on an even, dry and stable surface. Insert
the power plug into an electrical power socket. Place a suitable container under the chamber A3.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSG 3508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSG 3508 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info