Manual Sencor SRV 9550 (page 14 of 18) (English)

759463

Zoom out

Zoom in

1/18

- 14 - 12/2020

EN Robotic vacuum cleaner

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

■ Carefully unpack the appliance and take care not to throw away any part of the

packaging before you find all the parts of the appliance.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Infrared signal sensor

A2 Anti-collision sensors (in the

bumper bar)

A3 Lidar-type laser sensor

A4 Inspection window

Enables one to check the amount of

debris inside the dust container

A5 Button for turning the automatic

cleaning mode on/off and for

turning off automatic cleaning

A6 Return to the charging station

button

A7 Side sensor

A8 Vents (on both sides of the vacuum

cleaner)

A9 Charging contacts

A10 Anti-fall sensor, central

A11 Side rotary brush

A12 Bottom anti-fall sensor, left

A13 Left motorised rubber wheel

A14 Central rotary brush

A15 Dust container / water tank with

dust container

A16 Front swivel wheel

A17 Bottom anti-fall sensor, right

A18 Top battery cover

A19 Right motorised rubber wheel

B1 Power indicator

B2 Charging station

B3 Charging contacts

B4 Cut-out for power adapter cable

B5 Storage compartment

B6 Power adapter plug socket

B7 Bottom cover

B8 Power adapter

B9 Power adapter plug

C1 Dust container with capacity of 480

C2 Filter holder

C3 Fine filter

C4 HEPA filter

Highly effective air-borne particle

filter able to capture even the finest

dust particles.

C5 HEPA filter holder

C6 Latch for releasing the container

from the vacuum cleaner

D1 Water tank with capacity of 260 ml

D2 Rubber cap of the filling hole

D3 Filling hole

D4 HEPA filter

Highly effective air-borne particle

filter able to capture even the finest

dust particles.

D5 Dust container with capacity of

240ml

D6 Latch for releasing the dust

container

D7 Latch for releasing the water tank

from the vacuum cleaner

E1 Mop holder

E2 Latch for releasing the holder from

the vacuum cleaner

E3 Mop fastening velcro strips

E4 Mop fabric

E5 Mop attachment fastening groove

F1 Remote control

F2 Display

F3 Scheduled cleaning setting button

F4 System time setting button

F5 Forward direction button / increase

time value

F6 Left direction button / switch to

minutes

F7 Right direction button / switch to

hours

F8 Backwards direction button /

decrease time value

F9 Button for turning the automatic

cleaning mode on/off and for

turning off automatic cleaning

F10 Suction power adjustment button

F11 Start the along-the-walls cleaning

mode button

F12 Return to the charging station

button

F13 Battery compartment cover

F14 Battery compartment (2pcs AAA ×

1.5V)

G1 Rotary brush cover

G2 Latches

G3 Brushes

G4 Brush bearings

G5 Central rotary brush compartment

G6 Replacement rubber brush, suitable

for floating floors

H1 Cleaning brush H2 Blade

Serves to cut hair that is wound on

to the central brush

I1 Battery

I2 Connector

I3 Battery compartment

PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM

CLEANER

■ The robotic vacuum cleaner is intended for cleaning various types of hard floors

such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with alow

pile height. While vacuuming, it effectively combines various routes to optimally

clean the entire floor area.

■ The suction hole effectively removes hair, animal fur, etc. The side rotary brush

brushes dirt out of hard-to-reach places along walls and furniture and out of corners.

The motorised rubber wheels protect sensitive floors against scratching and can

travel over threshold strips up to aheight of 1.5 cm and ride on to a2 cm high carpet.

■ The suspended bumper enables the vacuum cleaner to dampen the approach to an

obstacle and to efficiently clean around it. The infrared sensors in the front bumper

prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in

rooms with stairs is made possible by the bottom anti-stair-fall sensors.

■ Another advantage of the robotic vacuum cleaner is the mop function, which

enables dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum

cleaner vacuums small bits of dirt and dust from the floor to prevent the mop fabric

from being excessively soiled during the cleaning cycle. When the vacuum cleaner

finishes cleaning, it will automatically shut off the supply of water and thereby limit

it leaking on to the floor.

■ For easy operating status identification, there is abutton on the cover fitted with an

indicator light, the colour of which indicates various operating states, see chapter

GUIDE TO LIGHT INDICATORS. Apart from the indicator lights, the vacuum cleaner

also has audio signals and voice messages that accompany certain functions or error

states of the vacuum cleaner.

■ Comfortable control is made possible by asmart device application that enables the

vacuum cleaner to be turned on and off, to be set to the automatic cleaning mode,

to select an operating mode, to send the robotic vacuum cleaner to the charging

station or to set scheduled cleaning.

■ The vacuum cleaner navigates within an area by means of aLidar-type laser sensor

and aGYRO MAPPING function, which can identify the space geometry of aroom in

which it is cleaning, and thereby the vacuum cleaner is able to better clean the floor.

This is abuilt-in function and cannot be affected in any way.

PREPARING FOR OPERATION

INSTALLING AND USING THE SIDE ROTARY BRUSH

■ The side rotary brush A11 is intended for smooth floor surfaces and ensures

effective cleaning in corners, along walls and furniture.

■ If the robotic vacuum cleaner is not supplied with the rotary brush already installed,

it is necessary to attach it. Turn the robotic vacuum cleaner upside down and push

the brush with force on to the pin.

Attention:

When turning the vacuum cleaner upside down for maintenance

tasks, ensure that it does not fall out of your hands on to the

floor or that you do not damage its laser sensor A3 when putting

it down. We recommend placing the vacuum cleaner on to

asuitable soft surface.

■ When using the robotic vacuum cleaner to clean rooms with carpets, remove

the side rotary brush. When removing it, proceed in the reverse sequence to its

installation.

LOCATION OF THE CHARGING STATION

■ The charging station B2 serves to automatically recharge the battery and the

vacuum cleaner must have good access to it.

■ Select alocation for the charging station that is hard, horizontal and dry, and that

is within reach of apower socket. Make sure that there are no stairs or obstacles

within adistance of at least 0.5m on the left and right of the charging station and

within adistance of at least 1.5m in front of the charging station, that would prevent

the vacuum cleaner from finding the charging station and docking successfully. It is

appropriate to position the rear part of the charging station against awall or apiece

of furniture.

■ Remove cover B7 from the underside of the charging station. Connect the power

adapter cable plug into the socket B6 in the body of the charging station and lead

the power cord through the cut-out B4 in the body of the charging station. Based

on the distance of the charging station from the power socket, the unneeded part

of the power cord can be wound up in the power cord compartment. Then put the

bottom cover back on.

■ Place the charging station in the selected location and insert the power cord plug

into apower socket. Place the remainder of the power cord in such away that it does

not tangle into the cleaning brushes of the vacuum cleaner.

■ In the event that the vacuum cleaner is not used for an extended period of time,

disconnect the charging station from the power socket and store it in adry, clean

and cool place.

CHARGING THE BATTERY FOR THE FIRST TIME

■ Before using the vacuum cleaner for the first time, it is necessary to fully charge the

battery for at least 5 hours.

■ Check that the charging station is correctly positioned and connected to apower

socket according to chapter LOCATION OF THE CHARGING STATION.

■ Hold down button A5 ( ) for more than 3 seconds. The indicator in buttons A5

( ) andA6 ( ) will start to flash slowly in blue colour and amelody will be

played. When the indicator is lit blue, the vacuum cleaner is ready for operation.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SRV 9550 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SRV 9550 Manual

Product: