Manual Sencor SRV 8550 (page 8 of 11) (English)

759464

Zoom out

Zoom in

1/11

- 8 - 08/2020

EN Robotic vacuum cleaner

User'smanual

BEFORE FIRST USE

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’s manual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event of

transportation, we recommend that you pack the appliance in the original box from

the manufacturer.

■ Carefully unpack the appliance and take care not to throw away any part of the

packaging before you find all the parts of the appliance.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Anti-collision sensors (in the bumper

bar)

A2 Button for starting and stopping the

automatic cleaning mode

A3 Lid

A4 Water tank with mop holder

A5 Camera

A6 Dust container

A7 Power switch

A8 Side sensor (on both sides of the

vacuum cleaner)

A9 Anti-fall sensor, central

A10 Charging contacts

A11 Left side rotary brush

A12 Bottom anti-fall sensor, left

A13 Left motorised rubber wheel

A14 Battery cover

A15 Holes for mop holder

A16 Wiping system cover

A17 Right side rotary brush

A18 Front swivel wheel

A19 Bottom anti-fall sensor, right

A20 Right motorised rubber wheel

A21 Central rotary brush cover

A22 Central rotary brush

B1 Charging station

B2 Charging contacts

B3 Power adapter plug socket

B4 Power adapter

C1 Remote control

C2 Return to the charging station

button

C3 Direction buttons

C4 Button for starting and stopping the

automatic cleaning mode

C5 Small area intensive cleaning mode

C6 Along-the-walls cleaning mode

C7 Voice messages on/off

C8 Increase suction power

C9 Decrease suction power

D1 Latch for releasing the container

from the vacuum cleaner

D2 Rubber cap of the filling hole

D3 Mop holder

D4 Mop fabric

E1 Latch for releasing the dust container

from the vacuum cleaner

E2 Cleaning brush with blade for

cutting through hair, etc.

E3 HEPA filter with holder

Highly effective air-borne particle

filter able to capture even the finest

dust particles.

E4 Top cover

E5 Bottom dust container cover

E6 Bottom cover release button

F1 Rotary brush cover latches

F2 Brushes

F3 Brush bearings

PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM

CLEANER

■ The robotic vacuum cleaner is intended for cleaning various types of hard floors such

as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with a low pile

height. While vacuuming, it effectively combines various routes to optimally clean the

entire floor area.

■ The suction hole effectively removes hair, animal fur, etc. The side rotary brushes

brush dirt out of hard-to-reach places along walls and furniture and out of corners.

The motorised rubber wheels protect sensitive floors against scratching and can travel

over threshold strips up to aheight of 1.5 cm and ride on to a2 cm high carpet.

■ The suspended bumper enables the vacuum cleaner to dampen the approach to an

obstacle and to efficiently clean around it. The infrared sensors in the front bumper

prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in

rooms with stairs is made possible by the bottom anti-stair-fall sensors.

■ Another advantage of the robotic vacuum cleaner is the mop function, which enables

dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum cleaner

vacuums small bits of dirt and dust from the floor to prevent the mop fabric from

being excessively soiled during the cleaning cycle. When the vacuum cleaner finishes

cleaning, it will automatically shut off the supply of water and thereby limit it leaking

on to the floor.

■ For easy operating status identification, there is abutton on the cover fitted with an

indicator light, the colour of which indicates various operating states, see chapter

GUIDE TO LIGHT INDICATORS. Apart from the indicator light, the vacuum cleaner also

has voice messages that accompany certain functions or error states of the vacuum

cleaner.

■ Comfortable control is made possible by asmart device application that enables the

vacuum cleaner to be turned on and off, to be set to the automatic cleaning mode, to

select an operating mode, to send the robotic vacuum cleaner to the charging station

or to set scheduled cleaning.

■ The vacuum cleaner navigates within an area by means of aSLAM type navigation

system (simultaneous localisation and mapping) and a GYRO MAPPING function,

which can identify the space geometry of aroom in which it is cleaning, and thereby

the vacuum cleaner is able to better clean the floor. This is a built-in function and

cannot be affected in any way.

PREPARING FOR OPERATION

INSTALLING THE SIDE ROTARY BRUSHES AND THEIR USE

■ The side rotary brushes A11 and A17 are intended for smooth floor surfaces and

ensure effective cleaning in corners, along walls and furniture.

■ If the robotic vacuum cleaner is not supplied with the rotary brushes already installed,

it is necessary to install them. Turn the robotic vacuum cleaner upside down and push

the brushes with force on to the pin.

Attention:

When turning the vacuum cleaner upside down, ensure that it

does not fall out of your hands on to the floor or that you do not

damage its camera A5 when putting it down. We recommend

placing the vacuum cleaner on to asuitable soft surface.

■ When using the robotic vacuum cleaner to clean rooms with carpets, remove the side

rotary brushes. When disassembling, use force to slide the brushes upwards off the pins.

LOCATION OF THE CHARGING STATION

■ The charging station B1 serves to automatically recharge the battery and the vacuum

cleaner must have good access to it.

■ Select alocation for the charging station that is hard, horizontal and dry, and that is within

reach of apower socket. Make sure that there are no stairs or obstacles within adistance of

at least 1.5m on the left, right and in front of the charging station that would prevent the

vacuum cleaner from finding the charging station and docking successfully. It is appropriate

to position the rear part of the charging station against awall or apiece of furniture.

■ Insert the plug of the power adapter into socket B3, and insert the power cord plug

into apower socket. Place the power cord in such away that it does not tangle into the

cleaning brushes or the wheels of the robotic vacuum cleaner.

■ In the event that the vacuum cleaner is not used for an extended period of time,

disconnect the charging station from the power socket and store it in adry, clean and

cool place.

CHARGING THE BATTERY FOR THE FIRST TIME

■ Before using the vacuum cleaner for the first time, it is necessary to fully charge the

battery for at least 12 hours.

■ Check that the charging station is correctly positioned and connected to apower

socket according to chapter LOCATION OF THE CHARGING STATION.

■ Open the cover A3 and set the main switch A7 to the ON position.

■ Grasp the robotic vacuum cleaner and manually place it into the charging station so

that the charging contacts A10 on the underside of the robotic vacuum cleaner and

the charging contacts B2 on the charging station are connected. When the contacts

are connected, the charging process will start.

■ During the charging process, the indicator light in button A2 will flash white.

■ When the battery is fully charged, the indicator light will remain permanently lit white,

avoice message will be sounded and the charging process will end automatically. The

vacuum cleaner is now ready for use.

Note:

Further details about automatic or manual charging of the robotic vacuum

cleaner are found in chapter CHARGING THE ROBOTIC VACUUM CLEANER

INSERTING AND REPLACING BATTERIES IN THE REMOTE

CONTROL

Insert two type AAA (1.5 V) batteries into the remote control. When inserting the

batteries ensure the correct polarity as shown inside the battery compartment.

In the event that the batteries are flat, replace them with new ones. Do not combine

various types of batteries or new and old batteries.

The signal range of the remote control is approximately 5m.

Operation

Note:

Before starting the vacuum cleaner, always check that the dust container,

together with the HEPA filter, is inserted in place.

TURNING ON

■ Open the cover A3 and set the main switch A7 to the ON position.

■ Press button A2 on the vacuum cleaner or button C4 on the remote control. The

indicator inside the button will be lit, a voice message will be sounded and the

vacuum cleaner will switch to the stand-by mode.

STAND-BY MODE

■ The stand-by mode means that the vacuum cleaner is idle but ready for operation.

Button A2 is backlit white and the vacuum cleaner awaits acommand.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SRV 8550 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SRV 8550 Manual

Product: