■Prior to cleaning it, always turn off the vacuum cleaner using the main switch A4.
■For cleaning, never use abrasive cleaning products, solvents, etc.
■Neglecting cleaning and maintenance may negatively affect the functioning of the
vacuum cleaner and lead to its reduced performance.
DUST CONTAINER AND DUST FILTER
■Empty out the dust container A11 after every use and clean it regularly. Open the
lid A3 and take out the dust container. Open the dust container lid A14 and tip out
the contents of the container. For hygiene reasons, we recommend doing this away
from living areas.
■Remove the dust filter A12 and holder A13 from the dust container.
■Wash the dust container under running water and dry it well.
Note:
It is not necessary to wash the dust container after every use.
■Tap out or clean the dust filter using asoft brush and insert it back into the holder
and the dust container. If the filter is damaged, replace it with anew one.
■Using awet wiping cloth, clean out the area for the dust container A7 and the
exhaust hole A8.
■Return the closed dust container back into the vacuum cleaner and shut the vacuum
cleaner cover.
Attention:
Do not wash the dust container or the dust filter in adishwasher.
The dust filter must not be washed using water.
Before putting the vacuum cleaner back into operation, check
that the dust filter is in its location. Otherwise the vacuum
cleaner may be damaged.
SUCTION HOLE
■With repeat use, dust and dirt may accumulate around the suction hole A22, which
may manifest itself through decreased suction efficiency. To clean out the suction
hole, first take out the central rotary brush. Remove the dirt and dust from the
suction hole using asoft brush. Regularly clean the suction hole to ensure maximum
suction power.
CENTRAL ROTARY BRUSH
■Push on the latches F1 of the central rotary brush cover F2 and take the cover out
together with the brush.
■Use adry wiping cloth to clean out the area in which the rotary brush is housed.
Clean out the suction hole as described in the previous paragraph.
■Remove any dirt and material (dust, wound on hair, animal fur, etc.) from the rotary
brush.
■Reinsert the rotary brush and its cover.
ROTARY BRUSHES
■Remove the rotary brushes A17 and A23 by pulling them upwards. Remove any
dust and dirt from the location where the brushes were mounted.
■Remove all dust and dirt from the brushes. If necessary you may wash the brushes
under running water. If the bristles were deformed while the vacuum cleaner was
running, dip them in warm water to allow them to return to their original shape.
Allow the brushes to dry before reattaching to the vacuum cleaner.
■After cleaning them, reattach them.
Note:
The rotary brushes become worn out when used. After acertain time it
is necessary to replace the used brushes with new ones. To order new
brushes, please contact your vendor or an authorised service centre.
MOP
■After every use of the mop function, remove the duster D4, wash it by hand in
lukewarm water with the addition of asmall amount of gentle washing powder and
allow it to dry naturally. Wipe the water tank D1 using alightly dampened cloth
and then wipe it dry.
COMPLETE ROBOTIC VACUUM CLEANER
■Regularly wipe the surface of the vacuum cleaner using asoft dry wiping cloth.
■At least once per week or more frequently, clean the front swivel wheel A24, the
motorized wheels A19 and A26, the suction hole A22, rotary brushes A17 and A23
and the bottom sensors A15, A18 and A25.
■First remove any coarser dirt from the front swivel wheel and the motorised wheels.
Then clean them around their entire perimeter using alightly dampened cloth and
wipe them dry. Do not forget to also clean the area around the wheels.
■Wipe the sensors on the underside of the vacuum cleaner using asoft dry wiping
cloth or cotton bud.
CHARGING STATION
■At least once per week, clean the surface of the charging bast B3 including the
charging contacts B5 using asoft dry wiping cloth.
STORAGE
■When not using the vacuum cleaner for an extended period of time, do the
following:
■Clean the vacuum cleaner as described in chapter CLEANING AND MAINTENANCE.
■Remove the battery from the vacuum cleaner as described in chapter INSERTING
AND REMOVING THE BATTERY.
■Disconnect the charging station from the power socket.
■Store the vacuum cleaner with all its accessories in adry, clean and cool place.
TECHNICAL SPECIFICATIONS
Robotic vacuum cleaner
Dimensions (diameter × height) .............................................................................. 320 × 80 mm
Weight ................................................................................................................................................2.2 kg
Operating time per single charge ..............................................................................up to 90 min
Dust container capacity ........................................................................................................... 500 ml
Power adapter
Rated voltage range ....................................................................................................100−240 VAC
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sencor SRV 2230 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sencor SRV 2230 in the language / languages: English as an attachment in your email.
The manual is 0,56 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
