756744
10
Zoom out
Zoom in
Previous page
1/68
Next page
EN - 8
5. To remove the CD, press STOP BUTTON and open CD compartment lid, grasp the CD by its
edges, and carefully take it out.
Note:
1. To ensure good system performance; wait until the disc tray completely reads the disc before
proceeding.
2. If no disc is loaded into the compartment, or the disc is placed upside down, the display will show
NO DISC.
PLAYING A DISC
After loading the disc, the unit starts playback automatically.
1. The playback starts from track 1, the “Track 01” indicator is shown on the display.
To interrupt playback, press the PLAY/PAUSE button. The “current playing time” indicator will ash
on the display.
To resume playback, press the PLAY/PAUSE button again.
2. To stop playback, press the STOP button, the total number of tracks appears on the display.
SELECTING A DESIRED TRACK/PASSAGE
To select a desired track
Press the / button repeatedly in stop mode or during play until the desired track appears
on the display.
Press the PLAY/PAUSE button to start play.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the / button to scan the current playing track at high speed until desired pas-
sage appears, and then release the button. Playback will start again from this point.
To select a song which track number exceeds 10(for MP3 disc only)
To select a song/track which number exceeds 10, Press the 10/FOLD./M.+ or 10/FOLD./M.- button
each time to skip forward/backward 10 tracks, then press the or button to select desired
track. For example: to select the 17th track, press 10/FOLD./M.+ button, and then the button six
times immediately.
To Select A Desired Folder(for MP3 disc only)
(if the MP3 disc contains more than one folder)
To skip to the desired folder during playback, press and hold the 10/FOLD./M.+ or 10/FOLD./M.- but-
ton for about 2 seconds to skip to next/previous folder.
PROGRAM TRACKS
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99 tracks
can be stored in the memory in any order.
1. In stop mode, press the PROG. /P-MODE button, the P01 indicator will be on.
2. Press the CD or button to select the rst desired track to be programmed.
3. Press the PROG./P-MODE button to enter. The display changes to show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the PLAY/PAUSE button to start playback from the rst programmed track.
6. Press the STOP button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the STOP button when the disc is stopped, and
2. Open the CD compartment lid, program will be erased.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SPT 3907 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SPT 3907 in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info