759194
7
Zoom out
Zoom in
Previous page
1/10
Next page
Electric Oil Filled Radiator
SOH 2107BK
EN
EN-7
Copyright © 2016, Fast ČR, a.s. Revision 07/2016
ASSEMBLING THE HEATER
Before using it, attach the feet A6 to the heater. Attach the front feet to the bottom part of the
control panel, and insert the rear feet from underneath on to the last heating column, see figure B.
B
After attaching the feet A6, check the stability of the heater on an even, dry and firm surface.
USING THE HEATER
1. Place the heater on an even, dry and firm surface and plug it into a power socket. Turn the
temperature control dial A2 clockwise to maximum, and to turn it on, set the power switch A3
to position I (On). The indicator light turns on to indicate that the heating element is turned on.
Note:
Upon first use or after it has not been used for an extended period of time, a slight odour may
be sensed from the heater. This is completely normal and will quickly disappear.
2. When the required room temperature is reached, it is necessary to set the thermostat to maintain
this temperature. To set the thermostat, slowly turn the control dial A2 anticlockwise until a click
is heard and the indicator light turns off. The built-in thermostat will maintain the set temperature
by automatically switching the heating element on and off. This is indicated by the indicator light
turning on and off. You can increase or decrease the temperature at any time by turning the control
dial A2 clockwise or anticlockwise.
3. When you have finished using the heater, set the control dial A2 to minimum and turn off the heater
by setting the power switch A3 to position 0 (Off). Disconnect the power cord from the power socket.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SOH 2107 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SOH 2107 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info