757130
8
Zoom out
Zoom in
Previous page
1/14
Next page
EN-6
For a voice transmission, press and hold the Call/PTT (transmit) (9)
button and speak into the microphone (8). Hold down this button until
the transmission of your message is complete.
Hold the microphone a minimum of 5 cm from your face.
Note:
- The other device must be set to the same channel and have set the
same CTCSS code (see point 7)
- After completing the transmission and releasing the Call/PTT (9)
button, the other device will make a sound signal (BEEP) to indicate
that this device is ready to transmit.
5. Changing Channels
Press the MENU button (6) once - the number of the current channel
will start ashing.
Press the - button (4) or the- (5) to change the channel.
Press the Call/PTT -button to (9) con rm and return to stand-by Mode.
Note:
If no button is pressed within 9 seconds during setting, the unit will
return to standby.
6. CTCSS(Continious Tone Coded Squelch System)
License free radio’s operating on the 446 MHZ frequency band
have 8 available radio channels. If there are many radio’s users in
your neighbourhood, there is a chance that some of these users are
operating on the same radio channel.
To prevent that you receive signals from other users, sub-channels
have been integrated.
Two radio’s will only be able to communicate with each other when
they are operating on the same radio channel and when they have
selected exactly the same sub-channel.
When using CTCSS, a low frequency tone (between 67 and
250 Hz) will be transmitted along with the voice signal. There are
38 available tones to choose from. You are free to choose one of
these 38 available tones. Due to ltering, these tones will generally
not be audible so they will not disturb the communication.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SMR 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SMR 110 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info