757155
12
Zoom out
Zoom in
Previous page
1/24
Next page
12 EN
EN
Revision 08/2017Copyright © 2017, Fast ČR, a. s.
Putting into operation and using
5. Putting into operation and using
Leave the unit turned off and make connections as you need -
especially connecting to your TV and internet.
5.1 Controlling applications
To confi rm the selection, remote controller’s“OK” button is usually
used. In some cases, switching to mouse control mode to confi rm
the selection with mouse is required.
Recommendation: To easily control the unit, we recommend
connecting wireless mouse and keyboard.
5.2 Putting into operation
1) when done with the wiring, connect the power adapter to
your power outlet and connect its plug to the unit’spower
socket. On the connected TV, select the input to which
you have connected your unit’soutput.
Note: The HDMI output takes priority over the Video output
(CVBS). If the HDMI output is connected to your TV, the
Video output (CVBS) is disabled. To enable, it’snecessary
to unplug the HDMI cable from the unit’soutput.
2) press the remote controller button to turn the unit on.
After awhile, the operating system will boot with and
the basic screen appears. After initial connection, basic
function setup wizard will launch. The wizard start-up
may take several minutes.
3) navigate through the setup wizard and set the following
items step-by-step (after each step, select Next): user
interface language, image size, internet connection
method (select either wireless WiFi or cable Ethernet;
the network protocol does not allow to enable both
methods simultaneously), when connecting to WiFi, enter
your network password (for details, please contact your
administrator).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SMP 5001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SMP 5001 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info