756601
28
Zoom out
Zoom in
Previous page
1/34
Next page
26 EN
EN
Revision 03/2020
Copyright © 2020, Fast ČR, a. s.
Troubleshooting
Problems Possible solutions
The TV set does not respond to
the remote controller.
The batteries in the remote controller might be
empty.
If it is necessary, replace them with new ones.
Clean the lens of the remote controller. The distance
between the LED TV set and the remote controller
should be no more than 8 m, in the recommended
operating angle and with no obstacles in the path
of the beam. Prevent the impact of strong light
(daylight, sunlight or fluorescent light lamps and
fluorescent tubes) on the TV and remote controller.
There are color points on the
screen.
Although the LED screen is made with high-precision
technology and 99.99% or more of the pixels are
operational, the screen can display permanently
unlit or lit points of light (red, blue or green). This is
aconstruction feature of the LED screen and is not
amalfunction.
The picture falls apart. Keep the TV set away from interfering sources of
electricity, such as cars, hair-dryers, welders and any
optional equipment.
The disintegration of image may be caused by
atmospheric phenomena, such as alocal or distant
thunderstorm.
When installing optional equipment, leave aspace
between the optional equipment and the TV set.
Check the antenna and the connection.
Keep the antenna away from the power or input/
output cables.
After automatic tuning only
some channels are available.
Check if your area is covered by digital TV
broadcasting. Try to retune or manually tune the
missing channels.
Check if you use the correct antenna type – see
page13 “Connecting the antenna”.
Cannot select achannel. Check if the channel is not blocked in the main menu
settings.
Cannot play from the USB
device.
Check the connecting channel between the USB and
power connection. The hard disc was not formatted.
Make sure that the USB flash unit is compatible and
contains supported formats of multimedia data.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SLE 65US600TCSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SLE 65US600TCSB in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor SLE 65US600TCSB

Sencor SLE 65US600TCSB User Manual - Polish - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info