756615
27
Zoom out
Zoom in
Previous page
1/34
Next page
EN 25
EN
Revision 12/2019Copyright © 2019, Fast ČR, a. s.
Troubleshooting
10. Troubleshooting
NOTICE:
Under no circumstances should you try to repair the appliance yourself, the
device does not contain parts that could be repaired by the user. Always take the
device to an authorized service center if arepair or adjustment are necessary
other than regular maintenance. Unauthorized interference with the device
is considered abreach and the loss of warranty claim. The importer, supplier,
distributor or vendor shall not be liable for any losses caused by aviolation of
regulations listed in this manual. Do not open the device, there is the danger
of electric shock. In the case of device failure, first check the following list of
problems and their solutions. If you fail to remove the defect according to the
following tips, contact your vendor.
Problems Possible solutions
The TV set has no power. Check the attached power cord and the functioning of
the electrical outlet.
Unplug the power cord, plug it in after 60 seconds
and turn the TV set on again.
No picture. Check the antenna connection.
There could have been problems at the broadcasting
station, try another station.
Adjust contrast and brightness.
Good picture, but no sound. Raise volume.
Check that the sound is not muted (Mute function).
Press MUTE on the remote controller. Check audio
settings.
If you use an external device, make sure that
itsvolume is not muted or the sound is not switched
off.
If you use the A/V or acomponent input, make sure
that the cables are correctly connected and are not
loose. If you use acable with DVI reduction on HDMI,
you need aseparate audio cable.
Make sure that the headphones jack is not occupied.
Good sound, but an unusually
colored picture or no picture.
Check the connection and the state of the antenna.
If you use acomponent input, check the connection.
Incorrect or loose connection can cause problems
with colors or empty screen.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SLE 43FS600TCS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SLE 43FS600TCS in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor SLE 43FS600TCS

Sencor SLE 43FS600TCS User Manual - Polish - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info