Manual Sencor SHI 6300 (page 5 of 6) (English)

760032

Zoom out

Zoom in

1/6

EN Hair iron

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

■ Carefully unpack the appliance and take care not to throw away any part of the

packaging before you find all the parts of the appliance.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Main switch

A2 Arm lock

A3 Swivel power cord end

A4 Hanging loop

A5 Display

A6 Heating surface (on both arms)

A7 Plate locking cover (on both arms)

A8 Lock button (on both arms)

A9 Ironing plates with large teeth

Used for creating large waves

A10 Ironing plates with fine teeth

Used for creating fine waves

A11 Smooth ironing plates

Used for smoothing out hair

PURPOSE OF USE AND FEATURES OF THE HAIR IRON

■ The hair iron is intended exclusively for straightening, undulating and styling

human hair. It must never be used for styling wigs, hairpieces, synthetic hair or for

straightening animal fur.

■ The iron is equipped with a temperature lock feature that prevents accidental

changes to the temperature while hair is being styled, and furthermore with an

automatic shut-off function that is activated after 60 minutes of inactivity.

■ The heating surface for the individual plates enables operating temperatures from

140°Cto 200°C.

APPLICATION

TURNING ON AND SETTING THE TEMPERATURE

■ Connect the iron to apower socket.

■ Press button A1. The appliance will beep, the default temperature of 140°C will start

flashing on the display and the iron will start heating up. When the temperature is

reached, the value will remain permanently lit.

■ By repeatedly pressing button A1, other temperatures are selected in the order

140°C, 160°C, 180°Cand 200°C.

TEMPERATURE LOCK FUNCTION

■ This function prevents accidental changes to the temperature while the iron is being

used. Activate the function by holding down button A1 for longer than 3seconds.

Alock symbol will appear on the display and the set temperature will be locked, i.e.

button A1 will not react when pressed.

■ Deactivate the function by holding down button A1 for longer than 3seconds. The

lock symbol will turn off.

TEMPERATURE LOCK FUNCTION

■ This function prevents accidental changes to the temperature while the iron is being

used. Activate the function by holding down button A1 for longer than 3seconds.

Alock symbol will appear on the display and the set temperature will be locked, i.e.

button A1 will not react when pressed.

■ Deactivate the function by holding down button A1 for longer than 3seconds. The

lock symbol will turn off.

Note:

If "888" appears on the display, this indicates that there is amalfunction of

the heat sensor or iron. If this happens, disconnect the iron from the power

grid and contact aservice centre.

AUTOMATIC SHUT-OFF FUNCTION

■ If no action is taken after turning on the iron, i.e. no button is pressed, then for safety

reasons, the iron will turn off automatically after 60minutes of inactivity. It will start

again after button A1 is pressed.

Attention:

The automatic shut-off is intended only for cases, where you

forget to turn off the iron using button A1. Do not use the

automatic shut-off to intentionally turn off the iron.

TEMPERATURE DEPENDING ON HAIR TYPE

■ The suitable temperature for straightening hair depends on the hair structure.

Depending on the type of hair, an incorrectly selected temperature may cause the

hair to dry out, become brittle or in the worst case to burn. Therefore, first try ironing

at alow temperature and set ahigher temperature only when necessary.

■ The information contained in the following table is for reference purposes only. It

may differ depending on hair type.

Hair type Temperature

Fine, damaged, discoloured, highlighted or dyed hair 140 °Cto 160 °C

Normal, lightly wavy hair 160 °Cto 180 °C

Very heavy, curly, unyielding hair 180 °Cto 200 °C

REMOVING AND INSERTING THE PLATES

■ Slide the lock button A8 towards symbol

(unlocked) and hold it in this position.

■ Slide the cover A7 out of the arm and release the lock button. The button will

automatically slide to symbol

(locked).

■ Take out the initial plate and slide anew plate on to the heating surface A6.

■ Slide the cover A7 back on to the arm. Correct attachment is accompanied by aclick.

■ Repeat the procedure also on the second arm of the iron. ATTENTION – Only insert

the same plate types into the arms.

PROCEDURE FOR STYLING HAIR

■ Wash your hair thoroughly, dry it completely and brush through thoroughly so that

it is smooth and without knots.

■ Separate this prepared hair using clips into equally wide strands (about 5cm wide).

■ Start to iron the back part of the head at the lower strands of hair – at the root place

the strand of hair between the plates and gently press the handle of the iron. With

asliding motion pull the iron all the way to the ends of the hair.

■ Repeat the procedure for the same strand of hair until you achieve the desired

appearance.

■ Continue in the same way with the remaining strands of hair (first on the front part

of the head and ending at the sides).

■ Before the final combing, allow the hair to fully cool down.

Attention:

Do not touch the ironing plates or the attachments - there

is adanger of burns!

Do not leave the iron in the one spot for longer than

5seconds as hair could be burnt.

Use the iron only on healthy hair. Do not use the iron on oily,

stuck together or sweaty hair. On perm or coloured hair only

use the iron infrequently.

Tip:

Adjust the speed of movement of the iron on the hair strands according

to their character (fine hair is more sensitive to a hot surface and

requires asignificantly shorter ironing time than stronger hair).

TURNING OFF THE IRON

■ When you have finished ironing, turn off the iron by pressing button A1 until the

display turns off. Turning off is also indicated by abeep.

■ Disconnect the iron from the power socket.

Attention:

Allow the iron and the plates to fully cool down before

storing!

CLEANING AND MAINTENANCE

Attention:

Clean the ironing plates and styling plates only after they

have fully cooled down!

No part of the iron may be submerged in water or washed

under running water!

■ To clean the outside parts of the iron and the ironing plates, use a fine cloth

dipped in lukewarm water. Do not use aggressive cleaning agents, paint thinners

or solvents. Using these solutions could damage the surface of the product. The

surface of the iron plates does not need any further cleaning. Prior to storing or

using them again, allow them to dry completely or wipe them dry.

STORAGE

When not using the iron for an extended period of time, do the following:

■ Clean the iron as described in chapter Cleaning and maintenance.

■ Place the iron in asafe, dust-free, clean and dry place that is out of reach of children.

■ If you wish to secure the arms against opening, press button A2.

TECHNICAL SPECIFICATIONS

Rated voltage range .................................................................................................... 100−240 VAC

Rated frequency........................................................................................................................50/60Hz

Rated power ................................................................................................................................ 45-50W

Temperature range .........................................................................................................140 to 200°C

Electrical shock protection class ........................................................................................................ II

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHI 6300 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SHI 6300 Manual

Product: