760031

Sencor SHI 5500 Manual

5
Zoom out
Zoom in
Previous page
1/6
Next page
- 5 - 06/2019Copyright © 2019, Fast ČR, a.s.
EN Hair straightening iron
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Ironing plates
A2 Increase temperature button
A3 Decrease temperature button
A4 Main switch
A5 Display
A6 Arm lock
A7 Swivel power cord end
A8 Hanging loop
PURPOSE OF USE AND FEATURES OF THE HAIR STRAIGHTENING
IRON
■ The hair straightening iron is intended exclusively for straightening and styling
human hair. It must never be used for styling wigs, hairpieces, synthetic hair or for
straightening animal fur.
■ The iron is equipped with an automatic safety shut-off function, that turns it off after
60minutes of inactivity.
■ The surface of the ironing plates is coated with titanium and enables operating
temperatures from 100 °C to 230 °C. The temperature can be controlled in
10°Cincrements.
APPLICATION
TURNING ON AND SETTING THE TEMPERATURE
■ Connect the iron to apower socket. The display A5 will show OFF.
■ Hold down button A4 for longer than 3seconds. The appliance will beep and the
default temperature of 100°C will be lit on the display and the iron will start heating
up.
■ The temperature can be adjusted in 10-degree increments in the range from
100°Cto 230°Cusing buttons A2 (+) andA6 (-).
■ Holding down button A2 (+) for longer than 3seconds, will automatically skip to
atemperature of 230°C.
Note:
If "888" appears on the display, this indicates that there is amalfunction of
the heat sensor or iron. If this happens, disconnect the iron from the power
grid and contact aservice centre.
AUTOMATIC SHUT-OFF FUNCTION
■ If no action is taken after turning on the iron, i.e. no button is pressed, then for safety
reasons, the iron will turn off automatically after 60 minutes of inactivity. It will start
again after button A4 is pressed.
Attention:
The automatic shut-off is intended only for cases, where you
forget to turn off the iron using button A4. Do not use the
automatic shut-off to intentionally turn off the iron.
TEMPERATURE DEPENDING ON HAIR TYPE
■ The suitable temperature for straightening hair depends on the hair structure.
Depending on the type of hair, an incorrectly selected temperature may cause the
hair to dry out, become brittle or in the worst case to burn. Therefore, first try ironing
at alow temperature (100°C) and set ahigher temperature only when necessary.
■ The information contained in the following table is for reference purposes only. It
may differ depending on hair type.
Hair type Temperature
Fine, damaged, discoloured, highlighted or dyed hair 100°Cto 150°C
Normal, lightly wavy hair 150°Cto 190°C
Very heavy, curly, unyielding hair 190°Cto 230°C
PROCEDURE FOR IRONING HAIR
■ Wash your hair thoroughly, dry it completely and brush through thoroughly so that
it is smooth and without knots.
■ Separate this prepared hair using clips into equally wide strands (about 5cm wide).
■ Start to iron the back part of the head at the lower strands of hair – at the root place
the strand of hair between the plates and gently press the handle of the iron. With
asliding motion pull the iron all the way to the ends of the hair.
■ Repeat the procedure for the same strand of hair until you achieve the desired
appearance.
■ Continue in the same way with the remaining strands of hair (first on the front part
of the head and ending at the sides).
■ Before the final combing, allow the hair to fully cool down.
Attention:
Do not touch the ironing plates - there is adanger of burns!
Do not leave the iron in the one spot for longer than
5seconds as hair could be burnt.
Use the iron only on healthy hair. Do not use the iron on oily,
stuck together or sweaty hair. On perm or coloured hair only
use the iron infrequently.
Tip:
Adjust the speed of movement of the iron on the hair strands according
to their character (fine hair is more sensitive to a hot surface and
requires asignificantly shorter ironing time than stronger hair).
TURNING OFF THE IRON
■ When you have finished ironing, turn off the iron by holding down button A4.
Abeep will be made and the display will show OFF.
■ Disconnect the iron from the power socket.
Attention:
Allow the iron to fully cool down before storing!
CLEANING AND MAINTENANCE
Attention:
Clean the ironing plates only after they have fully cooled
down!
No part of the iron may be submerged in water or washed
under running water!
■ To clean the outside parts of the iron and the ironing plates, use afine cloth dipped in
lukewarm water. Do not use aggressive cleaning agents, paint thinners or solvents.
Using these solutions could damage the surface of the product. Thesurface of the
iron plates does not need any further cleaning.
STORAGE
When not using the iron for an extended period of time, do the following:
■ Clean the iron as described in chapter Cleaning and maintenance.
■ Place the iron in asafe, dust-free, clean and dry place that is out of reach of children.
■ If you wish to secure the arms against opening, press button A6.
TECHNICAL SPECIFICATIONS
Rated voltage range .................................................................................................... 100−240 VAC
Rated frequency........................................................................................................................50/60Hz
Rated power ................................................................................................................................ 55-60W
Temperature range .........................................................................................................100 to 230°C
Electrical shock protection class ........................................................................................................ II
EXPLANATION OF TECHNICAL TERMINOLOGY
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty
insulation.
We reserve the right to change text and technical specifications.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHI 5500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHI 5500 in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info