760025

Sencor SHI 1100 Manual

5
Zoom out
Zoom in
Previous page
1/5
Next page
- 5 - 06/2019
Copyright © 2019, Fast ČR, a.s.
EN Hair straightening iron
User’manual
■ Prior to using this appliance, please read the user‘smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user‘smanual.
Keep this user‘smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user‘smanual.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor and warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Main switch with aLED power
indicator
A2 Swivel power cord end
A3 Hanging Loop
A4 Ironing plates
PURPOSE OF USE AND FEATURES OF THE HAIR STRAIGHTENING
IRON
■ The hair straightening iron is intended exclusively for straightening and styling
human hair. It must never be used for styling wigs, hairpieces, synthetic hair or for
straightening animal fur.
■ The surface of the ironing plates enables operating temperatures from 150 °C to
220 °C.
USE
Turning on and setting the temperature
■ Connect the iron to apower socket.
■ Press button A1. The LED indicator will turn on and the iron will start heating up. The
iron is ready for use after afew moments.
Procedure for ironing hair
■ Wash your hair thoroughly, dry it completely and brush through thoroughly so that
it is smooth and without knots.
■ Separate this prepared hair using clips into equally wide strands (about 5 cm wide).
■ Start to iron the back part of the head at the lower strands of hair – at the root place
the strand of hair between the plates and gently press the handle of the iron. With
asliding motion pull the iron all the way to the ends of the hair.
■ Repeat the procedure for the same strand of hair until you achieve the desired
appearance.
■ Continue in the same way with the remaining strands of hair (first on the front part
of the head and ending at the sides).
■ Before the final combing, allow the hair to fully cool down.
Attention:
Do not touch the ironing plates - there is adanger of burns!
Do not leave the iron in the one spot for longer than 2 seconds
as hair could be burnt.
Use the iron only on healthy hair. Do not use the iron on oily,
stuck together or sweaty hair. On perm or coloured hair only use
the iron infrequently.
Tip:
Adjust the speed of movement of the iron on the hair strands according
to their character (fine hair is more sensitive to ahot surface and requires
asignificantly shorter ironing time than stronger hair).
Turning off the iron
■ When you have finished ironing, turn off the iron by pressing button A1. The LED
indicator will turn off.
■ Disconnect the iron from the power socket.
Attention:
Allow the iron to fully cool down before storing!
CLEANING AND MAINTENANCE
Attention:
Clean the ironing plates only after they have fully cooled down!
No part of the iron may be submerged in water or washed under
running water!
To clean the outside parts of the iron and the ironing plates, use afine cloth dipped
in lukewarm water. Do not use aggressive cleaning agents, paint thinners or solvents.
Using these solutions could damage the surface of the product. The surface of the
ironing plates does not require any additional cleaning.
STORAGE
When not using the iron for an extended period of time, do the following:
■ Clean the iron as described in chapter Cleaning and maintenance.
■ Place the iron in asafe, dust-free, clean and dry place that is out of reach of children.
TECHNICAL SPECIFICATIONS
Rated voltage range. .................................................................................................... 100–240 VAC
Rated frequency........................................................................................................................50/60 Hz
Rated power ................................................................................................................................ 40-45 W
Electrical shock protection class ........................................................................................................ II
EXPLANATION OF TECHNICAL TERMINOLOGY
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty
insulation.
Amendments to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Take the packaging material to adesignated municipal waste facility.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal and recycling, take these
products to designated collection points. Alternatively, in some
European Union states or other European countries you may return
your appliances to the local retailer when buying an equivalent new
appliance. Correct disposal of this product helps save valuable natural
resources and prevents damage to the environment caused by
improper waste disposal. Ask your local authorities or collection facility for more
details. In accordance with national regulations penalties may be imposed for the
incorrect disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your vendor or supplier
for the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your vendor.
This appliance meets all the basic requirements of EU directives related
to it.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHI 1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHI 1100 in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info