759216
8
Zoom out
Zoom in
Previous page
1/10
Next page
EN-8
Portable Electric Patio Heater
SHH 1090BK
EN
2015 03/2015
Attention:
Never connect the patio heater to a power socket prior to starting installation or during the
course of the installation.
Before starting the installation, check the patio heater for damage, e.g. caused by a fall or
transportation!
1) Take the appliance and its accessories out of the packaging materials.
2) Turn the appliance upside down so that the handle 1 is pointing to the fl oor. Place the oval
washers 4 on to both legs of the heater 3 (see fi g. B).
3) Now place the metal base cover 5 on to the base 6. Then seat both parts together on to the legs
of the heater 3. At the same time, pull the power cord 9 through the centre hole in the base (see
g. C and D).
4) Now fasten the power cord 9 using the mounting plate 8 and two screws 7 to the base 6 (see
g. D).
5) Now use washers qa and screws 0 to fasten the base 6 to the legs of the heater 3. Firmly tighten
the screws (see fi g. F).
6) Turn the heater around so that the handle 1 is pointing upwards, i.e. stand it on its base 6 and
check that the patio heater is stable.
OPERATION OF THE PATIO HEATER
Attention:
If the appliance is put into operation for the fi rst time or if it has not been used for a long time,
then there may be a slight odour or smoke. In this case the odour or smoke are normal and will
disappear after a while.
1) Place the appliance on fi rm ground without obstacles and at least 1.5 metres from walls and things
made from fl ammable materials.
2) Connect the heater to a power socket, the switch must be in position "0" – turned off.
Attention!!
Before connecting this appliance to a power socket, make sure the voltage stated on the label
of the product corresponds to the voltage in your wall socket.
3) Set the switch to position "I" – turned on. This will put the heater into operation (see fi g. E).
4) After you have fi nished using the heater, set the switch back to position "0" and disconnect the
appliance from the power socket.
Automatic shut off safety function when the appliance is tipped over
The appliance is equipped with a safety device, which serves to automatically shut off the appliance
when it is tilted. If the appliance is in operation and it is tilted by approx. 40°, the safety function is
activated and the appliance will turn itself off. If the appliance is tipped over, this function serves as
protection against a hazardous situation arising.
TROUBLESHOOTING
If the appliance stops working:
1) Check that it is connected to the power grid and the socket is in order.
2) If it still does not work, please contact an authorised service centre.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHH 1090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHH 1090 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info