758491

Sencor SHB 5501CH Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
EN-8
EN
Stick Blender
SHB 5501CH
Copyright © 2019, Fast ČR, a.s. Revision 06/2019
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
• Before you start assembling or disassembling the appliance, check that the motor unit A3 is turned o and
disconnected from the power socket and that the rotating parts have come to acomplete stop. Parts that are
connected to the motor unit A3, must be thoroughly dry.
Stick blender
1. Attach the stick blender attachment A5 from underneath to the motor unit A3. The connection of both parts
is indicated by aclick.
2. Blend food in the beaker A6 or in another suitable container intended for coming into contact with food. The
anti-slip base pad Aqd also serves as alid for the beaker A6, when you wish to use it for short term storage of
food.
3. During disassembly, press and hold down the button A4 and at the same time remove the stick blender
attachment A5 from the motor unit A3.
Chopper
1. Place the bowl A9 into the anti-slip base pad A , and on to the central pin at the bottom of the bowl A9 seat
the blade assembly A .
2. Close the bowl using the lid A8, whilst ensuring that the blade assembly shaft ts into the middle part of
the lid A8 and that the safety locks along the sides of the lid A8 slide into the safety system of the bowl A9.
Turn the lid A8 clockwise all the way. This will secure it in place, and is indicated by aclick.
3. Place the motor unit A3 into the hole in the lid A8 and gently push it down until aclick is heard. Now the
chopper is assembled.
4. During disassembly, press and hold down the button A4 and at the same time remove the motor unit A3
from lid A8. Then continue in reverse sequence to the assembly of the chopper.
Hand mixer
1. Slide the beaters A into the holder A7, until they click in. Before use, always check that the beaters A are
securely attached.
2. Attach the holder A7 with the beaters A from underneath the motor unit A3. Attachment is indicated by
aclick.
3. Blend the food in the beaker A6 or in another suitable container intended for coming into contact with food.
The anti-slip base pad Aqd also serves as alid for the beaker A6, when you wish to use it for short term storage
of food.
4. During disassembly, press and hold down the button A4 and at the same time remove the holder A7 with the
beaters A from the motor unit A3. Then continue in reverse sequence to the assembly of the hand mixer.
Grater
1. With blades facing upwards, insert the grating blade A , Aws or Awd into the holder Aqk and push it down
slightly until aclick is heard and the cutting blade slides into the holder Aqk. Seat the shaft of the holder Aqk on
to the central pin at the bottom of the bowl Aql.
2. Cover the bowl Aql using the lid Aqj, whilst ensuring that the safety locks along the sides of the lid Aqj slide
into the safety system of the bowl Aql. Release the safety button located on the grip of the bowl Aql, and turn
the lid Aqj clockwise all the way. Release the safety button. This will secure the lid Aqj in place. Place the bowl
Aql into the anti-slip base pad Aw;.
3. Place the motor unit A3 into the hole A and gently push it down until aclick is heard. Insert the pusher A
into the feed tube A . Now the grater is assembled.
4. To disassemble proceed in the reverse sequence. To take o the motor unit A3 it is necessary to rst press and
hold the buttons A4. This will release the attachment, and the motor unit A3 can be taken out of the hole A
. Before removing the grinding blade A , Aws or Awd from the holder Aqk, rst release it by pushing down
slightly on the latch from underneath the grater.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHB 5501CH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHB 5501CH in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info