758465
7
Zoom out
Zoom in
Previous page
1/8
Next page
EN-7
07/2014
Copyright © 2014, Fast ČR, a.s.
Hand Blender
SHB 30WH / SHB 31GR / SHB 32BL / SHB 33OR / SHB 34RD / SHB 35VT / SHB 36YL / SHB 37GG / SHB 38RS
EN
3. When blending, hold the blender so that the blending attachment A4 is pointing perpendicular to
the bottom of the beaker. Ensure that the mixing blades A5 remain submerged in the processed
ingredients during the entire blending process. Otherwise ingredients could splatter out of the beaker.
4. You will achieve evenly blended ingredients when you move the blending attachment A4 in
a circular motion. If the ingredients stick to the mixing blades A5 or the walls of the beaker A6,
stop the blending process. Disconnect the blender from the power socket. Use a spatula to clean
the walls of the beaker A6 and the mixing blades A5. Then reconnect the blender to the power
socket and you can continue processing the ingredients.
5. The beaker A6 is supplied with a lid so that you can store unconsumed food in the refrigerator.
QUICK GUIDE TO BLENDING
Food type Amount Processing time Selecting a speed
Baby food, sauces 200–300 g 45 s Low speed
Shakes 300 ml 30 s High speed
Fruit, vegetables 200 g 45 s Low speed
Cheeses 100 g 30 s Low speed
Note:
The times provided above are only a reference. The actual processing time depends on how
thoroughly the ingredients are to be blended.
CLEANING AND MAINTENANCE
 Clean the blender after each use.
 First remove food remains that have stuck to the mixing blades A5. Submerge attachment A4
in hot warm water with a neutral kitchen detergent and turn the blender on for a while. This will
remove the large food remains from the mixing blades A5. Disconnect the blender from the power
socket before further cleaning.
 Take off the blending attachment A4. Rinse it under clean running water and dry thoroughly or
wash it in a dishwasher.
Attention:
Make sure that no water remains in the blending attachment A4, which could enter into the
motor unit A3 when the appliance is assembled and cause damage to it.
 Wipe the motor unit A3 with a lightly damp cloth and then dry it.
Attention:
The motor unit A3 must not be submerged in water or any other liquid.
 The blending beaker A6 and its lid can be washed under running water with the use of a neutral
kitchen detergent or in a dishwasher.
 Do not use abrasive cleaning products, petrol, solvents, etc. for cleaning.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHB 38 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHB 38 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info