755983
9
Zoom out
Zoom in
Previous page
1/12
Next page
Air Purier
SHA 8400WH
EN
EN-9
2020 11/2020
From the main unit A4 remove the frame with the lters A7. The frame has holders on both sides for easier removal.
D
Use avacuum cleaner with an attached upholstery brush nozzle to remove the dirt from the pre-lter and
activated carbon lter. The pre-lter is attached to the frame with the combination lter with a velcro zip. Remove
the pre-lter from the frame and vacuum out the activated carbon lter located underneath it. When cleaning,
proceed with care so as not to damage any of the lters.
In the event of signicant soiling of the pre-lter, wash it in lukewarm warm water. Then allow it to dry naturally.
Attention:
The activated carbon lter and HEPA lter are not washable.
After cleaning, reinstall the pre-lter into the frame. Before reattaching the pre-lter into the frame, make sure
that it is completely dry. Reinstall the frame with the lters A7 into the main unit A4 and close the cover A9.
When inserting the lters, make sure that the HEPA lter points backwards towards the fan A3 and the pre-lter
forwards towards the front cover A9. The holders located on the sides of the frame point outwards from the
main unit A4 towards the front cover A9.
Aashing LED indicator B1 will inform you when the lters A7 need to be replaced. The lifetime of the lters
A7 is approximately 6 months during standard use. You can purchase new lters from your vendor. Usually it is
necessary to only replace the frame with the activated carbon lter and HEPA lter and to reattach the exiting
pre-lter to it. Nevertheless, in the event that the pre-lter shows signs of wear, replace it also.
After replacing the lters, it is necessary to restart the purier. Connect the power cord to apower socket. Turn on
the purier and then press button B5 and hold it down for approximately 5 seconds. This will restart the purier
and LED indicator B1 will stop ashing.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHA 8400WH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHA 8400WH in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info