758993
13
Zoom out
Zoom in
Previous page
1/16
Next page
Multi-cooker and fryer
SFR 9300BK
EN
EN-13
2020 04/2020
YOGURT
For making homemade yoghurts. Use
boiled or pasteurised milk and ayoghurt
culture. The yoghurt culture can be
commercial unflavoured yoghurt, yoghurt
made earlier, yoghurt powder mixture
available in supermarkets or ayoghurt
culture from ahealth food store.
04:00 40 °C 00:30-9:59 ×
POPCORN
For making popcorn. Popcorn can be
made without oil or in asmall amount
of oil or fat. Simply flavour the finished
popcorn to taste.
00:08 240 °C 00:01-0:15 200–240 °C
MANUAL
Enables all cooking parameters to be
custom set based on recipes, amounts
of ingredients and your personal
preferences.
01:00 240 °C 00:01-9:59 40–240 °C
KEEP
WARM
For maintaining atemperature. The
program keeps food at atemperature of
approx. 80°Cfor the preset or custom
set time.
02:00 80 °C 00:30-9:59 ×
PRESET Delayed start. Enables you to start
cooking at atime of your choosing. 01:00 × 00:01-9:59 ×
Explanations:
× = function is not available or the setting can’t be made
* = Neither time nor temperature can be changed while heating up. When aboil is reached, time can be set in the
range from 0:10 to 0:15 min
Selecting aprogram
The programs from the left, centre and right menu can be selected in three ways:
- Using button C6 (function): Each time the button is pressed, programs are cycled through in an anticlockwise
direction, i.e. from left to right.
- Using button C3 (plus) in the stand-by mode: Each time the button is pressed, programs are cycled through in an
anticlockwise direction, i.e. from left to right
- Using button C10 (minus) in the stand-by mode: Each time the button is pressed, programs are cycled through
in aclockwise direction, i.e. from right to left.
Pressing any of the above described buttons is accompanied by ashort beep, flashing of the selected program and
the preset cooking values are shown on the display.
Starting, stopping and finishing aprogram
Start the cooking process by pressing button C11 (Start/Stop). The selected cooking program will flash, indicators
C7 will start loading and the preset time will start to countdown.
You can pause the cooking process at any time by pressing button C11 (Start/Stop).
When the multi-cooker finishes cooking, it will beep 3× and, depending on the selected program or setting, either
switch to the keep warm mode or the energy saving mode, i.e. the display will turn off. In this way the automatic
cooking function is finished.
ADJUSTING THE COOKING PROGRAMS
On most programs, it is possible to adjust some or all of the preset cooking parameters based on your needs and
experience. Adjustable parameters are listed in the program overview table.
Adjustable parameters can be adjusted both before and during the cooking process. The cooking parameters can
be adjusted at any time by pressing button C11 (Start/Stop).
After adjusting the parameters, start the cooking process by pressing button C11 (Start/Stop). The cooking process
will run in the same way as with automatic cooking.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SFR 9300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFR 9300 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info