Manual Sencor SFR 7200 (page 9 of 10) (English)

758991

Zoom out

Zoom in

1/10

- 9 - 03/2020

Food Temperature (°C)

Mushrooms 150

Onion rings 150

Zucchini 150

Chicken 160

Fondue from Parmesan 170

Cheese croquettes 170

Fish 170

Fish fingers 180

Fried prawns 180

Fried cheese 180

Doughnuts 190

French fries (frozen) Phase 1 170

Phase 2 190

Meat/fish/potato croquettes 190

Deep frying tips

■ When frying lighter foods such as French fries, select a higher temperature. On the

other hand when frying bulkier foods such as chicken drumsticks or meat balls,

select lower temperatures to ensure the foods are evenly fried inside.

■ It is appropriate to fry French fries in two phases. In the first phase, fry them for 5-10

minutes at 170°C and then allow them to cool down. In the second phase, fry them

for 2-4 minutes at 190°C.

■ When frying several food types start with those that require the lower temperature.

■ When frying pre-fried foods, use a higher temperature and a shorter frying time

than for raw foods.

Removing unpleasant odours from the frying medium

■ Some foods, for example fish, may impart an unpleasant odour to the frying

medium. This odour can be neutralised using the following method:

– heat the frying medium to a temperature of 160 ˚C

– place a few shoots of parsley or two slices of bread into the frying medium,

– wait until "bubbles" stop forming, then using a suitable utensil, remove the

parsley or bread.

Overheating protection

■ The fryer is equipped with a safety fuse against overheating, which protects it

against damage. In the event of the fryer heating up excessively, e.g. due to long

use or accidentally starting it without the frying medium, the safety fuse against

overheating will be activated automatically. In such a case, the deep fryer will shut

off. Disconnect the deep fryer from the power socket and allow it to cool down.

Contact an authorised service centre to request a replacement of the safety fuse.

Under no circumstances should you replace the safety fuse yourself.

Attention:

Despite the fact that the deep fryer has overheating protection,

do not use it empty without the frying medium. The incorrect

use of the deep fryer may negatively affect its working order and

lifetime.

Handling the frying medium

■ When not using the deep fryer regularly, it is recommended to pour the cooled

down frying medium into enclosed bottles or other deep frying containers and to

store it in a refrigerator or another cool place. Pour the frying medium into bottles

through a fine strainer to filter out food residues.

Warning:

Prior to transferring the frying medium, always allow it to cool

down sufficiently to prevent serious burns.

■ It is not necessary to replace the frying medium after every use. If you fry mainly

potatoes and filter the frying medium, it is possible is reuse it 8 to 10×. Do not use

the same frying medium for more than 6 months.

■ Always replace the frying medium when:

– it has a brown colour or from the very beginning stinks or smokes

– there is too much water in it. A high water concentration in the oil or shortening/

fat is indicated by bubbles and water drops, water steam and a rapidly rising

oil or shortening/fat. If the water concentration in the deep fryer is too high, it

may happen that the oil or shortening fat may explode out, which can be very

dangerous to both the people using the deep fryer as well as those in its vicinity.

■ If you wish to replace the frying medium, proceed as follows:

– prepare a container with an appropriate volume

– disconnect the deep fryer from the power grid

– tilt open the lid, take out the frying basket, hold the deep fryer unit by its handles

and pour out the frying medium into the prepared container

Warning:

Replace the frying medium only after it has cooled down

completely. In the event that shortening fat was used, it must still

be partially liquid for it to be poured out.

■ Never pour used frying medium into standard household waste. Every municipality

has different regulations for the disposal of table oils and fats. Request information

about your disposal options at the municipal or town council office.

■ If you wish to only filter out the frying medium, proceed as follows:

– disconnect the deep fryer from the power grid

– pour the completely cooled down frying medium from the frying pot into

another container with a suitable volume capacity.

– wash the frying pot and dry it thoroughly

– pour the frying medium back through an appropriate filtration paper

CLEANING AND MAINTENANCE

Attention:

Prior to any cleaning or maintenance, always disconnect the deep

fryer from the power grid and allow it to cool down completely.

Attention:

The deep fryer unit, power cord and the heating element are not

intended for washing in a dishwasher.

Do not spray these parts with water or any other liquid or

submerge them in water or any another liquid.

■ We recommend cleaning the deep fryer immediately after it cools down to prevent

food scraps from drying on. These are harder to remove later.

■ After every use, wipe the deep fryer unit and the heating module with heating

element using a soft damp cloth; wipe the power cord using a dry cloth.

■ Wash the lid, frying basket including the handle, oil bowl and frying pot in hot water

with detergent, rinse and dry thoroughly with a fine wiping cloth. The frying pot can

also be washed in a dishwasher.

■ Wipe out the inside of the deep fryer unit using paper towels, tougher soils can be

cleaned using a soft sponge and then wipe it dry.

■ In the event that the filter D2 or the viewing window glass D3 are very dirty, screw

out the cover plate D1 from the underside of the lid, wash the filter and the glass

in hot water with detergent, rinse and dry thoroughly with a fine cloth. Return both

parts to their place and screw the cover plate back on.

Attention:

To clean the deep fryer unit or the frying pot, never use chemicals,

dishwashing abrasive wool, steel wool or cleaning products with

abrasive component since these can damage them.

■ After pouring out the frying medium, always remove any dripped frying medium

and remains from prior deep frying.

STORAGE

■ Before storing it, the deep fryer must be completely cool and disconnected from the

power supply, clean and dry.

■ Assemble the deep fryer in the same way as for frying and put on the lid.

■ Then store the deep fryer in a clean, dry and well-ventilated place out of children's

reach.

Attention:

Keep the stored deep fryer away from extreme temperatures,

direct sunlight and excessive humidity and do not store it in an

overly dusty environment. Do not place any items on the stored

deep fryer.

TROUBLESHOOTING

■ If the appliance does not work as described in the user's manual, check the list of

most frequent problems below in order to remedy the problem. In the event that

your problem is not listed or if the problem persists, turn off the appliance, pull the

power plug out of the power socket and contact an authorised service centre. Under

no circumstances should you attempt to repair the appliance yourself.

Problem Possible cause Solution

The fryer is not

working

The fryer is not connected

to a power socket.

Check that the power plug is

connected to a power socket.

You did not turn on the

fryer, you did not set the

temperature.

Use the control dial to turn on the

deep fryer and set it to one of the

temperatures.

The deep fryer

overheated and

protection was activated.

Wait several minutes for the deep

fryer to cool down and try turning

it on again. If necessary, contact an

authorised service centre.

Food is

insufficiently

cooked.

You set a temperature

that is too low.

Use the control dial to increase the

temperature.

Too much food in the

frying basket. Remove some of the food.

The food contains

remains of ice or too

much moisture.

Before frying, remove the ice

remains and thoroughly dry the

food.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFR 7200 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SFR 7200 Manual

Product: