759932
6
Zoom out
Zoom in
Previous page
1/7
Next page
- 6 - 10/2019
Copyright © 2019, Fast ČR, a.s.
EN Hot Air Fan Heater
User'smanual
Prior to using this appliance, please read the usersmanual
thoroughly, even in cases where you have previously
familiarised yourself with the operation of similar types of
appliances. Only use the appliance in the manner described
in this user’smanual. Keep this user’smanual in asafe place
where it can be easily retrieved for future use.
We recommend saving the original cardboard box,
packaging material, purchase receipt and responsibility
statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the
manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Power indicator light
A2 Temperature control knob
A3 Turn switch for starting
just the fan,
for setting the power
level Ior II
and for turning off the
appliance.
A4 Air outlet grill
A5 Fan and heating elements
These parts are hidden
underneath the grill.
A6 Integrated carry handle
(not shown)
it is located at the rear of
the appliance.
A7 Air inlet grill
(not shown)
it is located at the rear of
the appliance.
OPERATING THE APPLIANCE
Before first use, remove all packaging materials including
promotional stickers and labels from the appliance.
Locate the appliance in a suitable location in accordance
with the safety instructions. Make sure that the inflow or
outflow vents A7 or A4 are not blocked, that the temperature
control knob A2 is set to minimum and the switch A3 is in
position 0 (off). Connect the appliance to a power socket.
After connecting the appliance to apower socket, indicator
light A1 will be lit.
1. SETTING AN OPERATING MODE
Set the temperature control knob A2 to maximum and select
the desired operating mode using switch A3.
Setting switch A3 Description of operating mode
0O
Air ventilation without heating.
Only the fan is running. Heating
elements are turned o.
I
Power is set to alow level (1 200 W).
The fan and one of the two heating
elements are running.
The heating element heats the air
and the fan ensures its ow into
the room.
II
Power is set to ahigh level (2 000
W). The fan and both the heating
elements are running. The heating
elements heat the air and the fan
ensures its ow into the room.
Note:
Upon first use or after it has not been used for an
extended period of time, aslight odour may be sensed
from the appliance. This is completely normal and will
quickly disappear.
2. TEMPERATURE CONTROL KNOB SETTING
The appliance is equipped with athermostat that serves to
maintain the desired temperature in the room.
To heat up the air in the room as fast as possible, set switch
A3 to the high power level and the temperature control
knob A2 to maximum. When the desired temperature has
been reached, slowly turn the temperature control knob A2
anticlockwise until you hear aclick. The set thermostat will
automatically switch the fan and heating elements A5 on
and off to maintain the desired temperature.
3. TURNING OFF
When you have finished using it, set the temperature
control knob A2 to minimum, set switch A3 to position 0
(off) and disconnect the power cord from the power socket.
After disconnecting the appliance from the power socket,
indicator light A1 will turn off. Allow the appliance to cool
down.
AUTOMATIC SHUT-OFF FUNCTION
The appliance is equipped with a safety mechanism that
automatically turns it off when it is accidentally knocked
over. After returning the appliance back to the operating
position, it will start running again.
THERMAL PROTECTION
The appliance is equipped with athermal fuse that turns it
off upon overheating. Should such a situation occur, turn
the appliance off and disconnect it from the power socket.
Make sure that the air inlet and outlet openings A7 or A4
are not blocked. Allow the appliance to cool down before
attempting to put it back into operation as this will give the
thermal fuse time to reset.
If you are unable to put the appliance back into operation,
contact an authorised service centre.
CLEANING AND MAINTENANCE
Before cleaning it, make sure that the appliance is turned off
and disconnected from the power socket. If the surface of
the appliance is hot, allow it to cool down.
Use a dry or lightly dampened wiping cloth to clean the
surface of the appliance. Then thoroughly wipe everything
dry. Dust that has settled inside the appliance can be
vacuumed out using avacuum cleaner through the air inlet
and outlet grills A7 and A4.
For cleaning, do not use cleaning products with an abrasive
effect, solvents, etc. Otherwise, outer surface of the
appliance may be damaged. Do not submerge the appliance
or its power cord in water or any other liquids.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SFH 7020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFH 7020 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info